Version 9 is the fqdn stuff which was introduced in 3.1. Use 3.2 as 3.1 is pretty broken.
Paul -- Paul Emmerich Looking for help with your Ceph cluster? Contact us at https://croit.io croit GmbH Freseniusstr. 31h 81247 München www.croit.io Tel: +49 89 1896585 90 On Mon, Jul 22, 2019 at 3:24 AM Brent Kennedy <bkenn...@cfl.rr.com> wrote: > I have a test cluster running centos 7.6 setup with two iscsi gateways ( > per the requirement ). I have the dashboard setup in nautilus ( 14.2.2 ) > and I added the iscsi gateways via the command. Both show down and when I > go to the dashboard it states: > > > > “ Unsupported `ceph-iscsi` config version. Expected 9 but found 8. “ > > > > Both iscsi gateways were setup from scratch since the latest and greatest > packages required for ceph iscsi install are not available in the centos > repositories. Is 3.0 not considered version 9? ( did I do something > wrong? ) Why is it called/detected as version 8 when its version 3? > > > > I also wondering, the package versions listed as required in the nautilus > docs(http://docs.ceph.com/docs/nautilus/rbd/iscsi-target-cli/) state > x.x.x or NEWER package, but when I try to add a gateway gwcli complains > about the tcmu-runner and targetcli versions and I have to use the > > Skipchecks=true option when adding them. > > > > Another thing came up, might be doing it wrong as well: > > Added a disk, then added the client, then tried to add the auth using the > auth command and it states: “Failed to update the client's auth: Invalid > password” > > > > Actual output: > > /iscsi-target...erpix:backup1> auth username=test password=test > > CMD: ../hosts/<client_iqn> auth * > > username=test, password=test, mutual_username=None, mutual_password=None > > CMD: ../hosts/<client_iqn> auth * > > auth to be set to username='test', password='test', > mutual_username='None', mutual_password='None' for > 'iqn.2019-07.com.somgthing:backup1' > > Failed to update the client's auth: Invalid username > > > > Did I miss something in the setup doc? > > > > Installed packages: > > rtslib: wget > https://github.com/open-iscsi/rtslib-fb/archive/v2.1.fb69.tar.gz > > target-cli: wget > https://github.com/open-iscsi/targetcli-fb/archive/v2.1.fb49.tar.gz > > tcmu-runner: wget > https://github.com/open-iscsi/tcmu-runner/archive/v1.4.1.tar.gz > > ceph-iscsi: wget https://github.com/ceph/ceph-iscsi/archive/3.0.tar.gz > > configshell: wget > https://github.com/open-iscsi/configshell-fb/archive/v1.1.fb25.tar.gz > > > > Other bits I installed as part of this: > > yum install epel-release python-pip python-devel -y > > yum groupinstall "Development Tools" -y > > python -m pip install --upgrade pip setuptools wheel > > pip install netifaces cryptography flask > > > > > > Any helps or pointer would be greatly appreciated! > > > > -Brent > > > > Existing Clusters: > > Test: Nautilus 14.2.2 with 3 osd servers, 1 mon/man, 1 gateway, 2 iscsi > gateways ( all virtual on nvme ) > > US Production(HDD): Nautilus 14.2.1 with 11 osd servers, 3 mons, 4 > gateways behind haproxy LB > > UK Production(HDD): Luminous 12.2.11 with 25 osd servers, 3 mons/man, 3 > gateways behind haproxy LB > > US Production(SSD): Luminous 12.2.11 with 6 osd servers, 3 mons/man, 3 > gateways behind haproxy LB > > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
