I am trying to build a Ceph cluster using ceph-deploy. To add OSDs, I used
the following command (which I had successfully used before to build
another cluster):
ceph-deploy osd create --block-db=ssd0/db0 --data=/dev/sdh osd0
ceph-deploy osd create --block-db=ssd0/db1 --data=/dev/sdi osd0
etc.
Prior to running those commands, I did manually create LVs on /dev/sda for
DB/WAL with:
*** on osd0 node***
sudo pvcreate /dev/sda
sudo vgcreate ssd0 /dev/sda;
for i in {0..9}; do
sudo lvcreate -L 40G -n db${i} ssd0;
done
******
But I just realized (after creating over 240 OSDs!) neither the host nor
each osd weight was added to the CRUSH map as far as I can tell (expected
weight for each osd is 3.67799):
cephuser@admin_node:~$ ceph osd tree
ID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF
-1 0 root default
0 hdd 0 osd.0 up 1.00000 1.00000
1 hdd 0 osd.1 up 1.00000 1.00000
(... and so on)
And checking the cruch map with `ceph osd crush dump` also confirms that
there are no host entries or weight (capacity) of each osd. At the same
time,
`ceph -s` and the dashboard correctly shows ` usage: 9.7 TiB used, 877 TiB
/ 886 TiB avail` (correct number for all the OSDs added so far). In fact,
the dashboard even correctly groups OSDs into correct hosts.
One additional info: I have been able to create a test pool `ceph osd pool
create mytest 8` but cannot create an object in the pool.
I am running Ceph version mimic 13.2.6 which I installed using ceph-deploy
version 2.0.1, all servers running Ubuntu 18.0.4.2.
Any help/advice is appreciated.
*Mami Hayashida*
*Research Computing Associate*
Univ. of Kentucky ITS Research Computing Infrastructure
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
