Hi, friends. I updated cluster from Hammer(0.94.10) to Jewel(10.2.10) recently an all works fine.
Now, i can't update cluster from Jewel to Luminous(12.2.5). I have 5 MONs. I updated packages, restarted MON service but MON didn't joined to cluster. In logs of new MON i see: 7f53bc797700 0 -- 192.168.144.96:6789/0 >> 192.168.144.6:6789/0 conn(0x7f53cf48e800 :-1 s=STATE_OPEN pgs=7342571 cs=1 l=0).fault initiating reconnect 7f53bc797700 0 -- 192.168.144.96:6789/0 >> 192.168.144.6:6789/0 conn(0x7f53cf48e800 :-1 s=STATE_OPEN pgs=7342573 cs=3 l=0).fault initiating reconnect in logs of current active MON i see: 7f5415beb700 10 mon.e@0(leader) e14 ms_verify_authorizer 192.168.144.96:6789/0 mon protocol 2 2018-06-09 19:55:14.979566 7f5415beb700 0 -- 192.168.144.6:6789/0 >> 192.168.144.96:6789/0 pipe(0x7f542d934000 sd=8 :6789 s=0 pgs=0 cs=0 l=0 c=0x7f542d99db00).accept connect_seq 24080 vs existing 24079 state standby 7f54178f3700 10 mon.e@0(leader) e14 ms_handle_reset 0x7f542d99db00 192.168.144.96:6789/0 7f5415beb700 0 can't decode unknown message type 1544 MSG_AUTH=17 7f5415beb700 0 -- 192.168.144.6:6789/0 >> 192.168.144.96:6789/0 pipe(0x7f542d934000 sd=8 :6789 s=2 pgs=6779228 cs=24081 l=0 c=0x7f542ca94a00).fault with nothing to send, going to s tandby and some times this: 7fc6ddb8b700 0 mon.e@0(leader) e8 ms_verify_authorizer cephx enabled, but no authorizer (required for mon) 7fc6ddb8b700 0 -- 192.168.144.6:6789/0 >> 192.168.144.94:6789/0 pipe(0x7fc6ff23e000 sd=12 :6789 s=0 pgs=0 cs=0 l=0 c=0x7fc6fb237800).accept: got bad authorizer I naven't reproduce this in test environment. I tested update Hammer->Jewel-Luminous many times in different setups and always all was fine. Any recommendation, please.
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
