Looking at the latency numbers in this thread, it seems to be a cut-through switch.
Subhachandra On Wed, Mar 21, 2018 at 12:58 PM, Subhachandra Chandra < schan...@grailbio.com> wrote: > Latency is a concern if your application is sending one packet at a time > and waiting for a reply. If you are streaming large blocks of data, the > first packet is delayed by the network latency but after that you will > receive a 10Gbps stream continuously. The latency for jumbo frames vs 1500 > byte frames depends upon the switch type. On a cut-through switch there is > very little difference but on a store-and-forward switch it will be > proportional to packet size. Most modern switching ASICs are capable of > cut-through operation. > > Subhachandra > > On Wed, Mar 21, 2018 at 7:15 AM, Willem Jan Withagen <w...@digiware.nl> > wrote: > >> On 21-3-2018 13:47, Paul Emmerich wrote: >> > Hi, >> > >> > 2.3µs is a typical delay for a 10GBASE-T connection. But fiber or SFP+ >> > DAC connections should be faster: switches are typically in the range of >> > ~500ns to 1µs. >> > >> > >> > But you'll find that this small difference in latency induced by the >> > switch will be quite irrelevant in the grand scheme of things when using >> > the Linux network stack... >> >> But I think it does when people start to worry about selecting High >> clock speed CPUS versus packages with more cores... >> >> 900ns is quite a lot if you have that mindset. >> And probably 1800ns at that, because the delay will be a both ends. >> Or perhaps even 3600ns because the delay is added at every ethernet >> connector??? >> >> But I'm inclined to believe you that the network stack could take quite >> some time... >> >> >> --WjW >> >> >> > Paul >> > >> > 2018-03-21 12:16 GMT+01:00 Willem Jan Withagen <w...@digiware.nl >> > <mailto:w...@digiware.nl>>: >> > >> > Hi, >> > >> > I just ran into this table for a 10G Netgear switch we use: >> > >> > Fiberdelays: >> > 10 Gbps vezelvertraging (64 bytepakketten): 1.827 µs >> > 10 Gbps vezelvertraging (512 bytepakketten): 1.919 µs >> > 10 Gbps vezelvertraging (1024 bytepakketten): 1.971 µs >> > 10 Gbps vezelvertraging (1518 bytepakketten): 1.905 µs >> > >> > Copperdelays: >> > 10 Gbps kopervertraging (64 bytepakketten): 2.728 µs >> > 10 Gbps kopervertraging (512 bytepakketten): 2.85 µs >> > 10 Gbps kopervertraging (1024 bytepakketten): 2.904 µs >> > 10 Gbps kopervertraging (1518 bytepakketten): 2.841 µs >> > >> > Fiberdelays: >> > 1 Gbps vezelvertraging (64 bytepakketten) 2.289 µs >> > 1 Gbps vezelvertraging (512 bytepakketten) 2.393 µs >> > 1 Gbps vezelvertraging (1024 bytepakketten) 2.423 µs >> > 1 Gbps vezelvertraging (1518 bytepakketten) 2.379 µs >> > >> > Copperdelays: >> > 1 Gbps kopervertraging (64 bytepakketten) 2.707 µs >> > 1 Gbps kopervertraging (512 bytepakketten) 2.821 µs >> > 1 Gbps kopervertraging (1024 bytepakketten) 2.866 µs >> > 1 Gbps kopervertraging (1518 bytepakketten) 2.826 µs >> > >> > So the difference is serious: 900ns on a total of 1900ns for a 10G >> > pakket. >> > Other strange thing is that 1K packets are slower than 1518 bytes. >> > >> > So that might warrant connecting boxes preferably with optics >> > instead of CAT cableing if you are trying to squeeze the max out of >> > a setup. >> > >> > Sad thing is that they do not report for jumbo frames, and doing >> these >> > measurements your self is not easy... >> > >> > --WjW >> > >> > _______________________________________________ >> > ceph-users mailing list >> > ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com> >> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com> >> > >> > >> > >> > >> > -- >> > -- >> > Paul Emmerich >> > >> > croit GmbH >> > Freseniusstr. 31h >> > 81247 München >> > www.croit.io <http://www.croit.io> >> > Tel: +49 89 1896585 90 >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@lists.ceph.com >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
