Thanks, JC,
You’re right I didn’t deploy any OSDs at that point. I didn’t think that would
be a problem since the last `ceph-deploy` command completed without error and
its log ended with:
The Ceph Object Gateway (RGW) is now running on host storage-test01 and default
port 7480
Maybe that’s a bug?
Anyway, I purged the cluster, rebuilt it with some OSDs, but I still don’t see
radosgw listening on port 7480.
Here’s my ceph.conf (it’s just the default, I haven’t touched it):
[global]
fsid = 849f7b15-1e31-450b-b17c-6599fb6ff94d
mon_initial_members = storage-test01
mon_host = 10.0.4.127
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
here’s my netstat:
# netstat -alp | grep rados
tcp 0 0 10.0.4.127:57504 10.0.4.127:6816 ESTABLISHED
19833/radosgw
tcp 0 0 10.0.4.127:43462 10.0.4.127:6832 ESTABLISHED
19833/radosgw
tcp 0 0 10.0.4.127:49848 10.0.4.127:6789 ESTABLISHED
19833/radosgw
unix 2 [ ACC ] STREAM LISTENING 262758 19833/radosgw
/var/run/ceph/ceph-client.rgw.storage-test01.asok
unix 3 [ ] STREAM CONNECTED 264433 19833/radosgw
ps:
20243 ? Ssl 0:00 /usr/bin/radosgw -f --cluster ceph --name
client.rgw.storage-test01 --setuser ceph --setgroup ceph
Sometimes there’s an intermittent “Initialization timeout, failed to
initialize” in the rgw log, but it doesn’t occur when I restart the services.
Let me know if I can send anything else, I’d really like to get this up and
running!
Thanks
Piers.
From: Jean-Charles Lopez [mailto:[email protected]]
Sent: Monday, February 05, 2018 5:23 PM
To: Piers Haken <[email protected]>
Cc: [email protected]
Subject: Re: [ceph-users] radosgw not listening after installation
Hi,
first of all just in case, it looks like your script does not deploy any OSDs
as you go straight from MON to RGW.
then, RGW does listen by default on 7480 and what you see on 6789 is the MON
listening.
Investigation:
- Make sure your ceph-radosgw process is running first.
- If not running, have a look at the log to see why it may have failed.
- Paste some more information in this mailing list so we can help you find the
problem (e.g. output of ceph-deploy, log of your RGW, ...)
My bet is that given that you haven’t deployed any OSDs the RGW can’t create
the pools it needs to stroe data. May be not but just guessing from what you
showed us.
Regards
JC
On Feb 5, 2018, at 16:51, Piers Haken
<[email protected]<mailto:[email protected]>> wrote:
i'm trying to setup radosgw on a brand new clutser, but I'm running into an
issue where it's not listening on the default port (7480)
here's my install script:
ceph-deploy new $NODE
ceph-deploy install --release luminous $NODE
ceph-deploy install --release luminous --rgw $NODE
ceph-deploy mon create-initial
ceph-deploy admin $NODE
ceph-deploy rgw create $NODE
this is on debian 9.3 (stretch) on a clean machine.
the /usr/bin/radosgw process is running, and it's listening on port 6789 (this
is not an HTTP server, but some insternal binary protocol), but the docs say it
should be listening for HTTP requestst on port 7480.
what am i missing here?
_______________________________________________
ceph-users mailing list
[email protected]<mailto:[email protected]>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.ceph.com%2Flistinfo.cgi%2Fceph-users-ceph.com&data=02%7C01%7C%7Cc82c135cd4b04a359eef08d56d001f64%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636534769653549303&sdata=WfV19ft%2BydpuLRkWaNiuQv%2BiFO9An9FrH%2B47cIYe40Y%3D&reserved=0>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
