Hi Josy, just a doubt but it looks like your ASOK file is the one from a Ceph Manager. So my suspicion is that you may be running the command from the wrong machine.
To run this command, you need to ssh into the machine where the client connection is being initiated. But may be I am wrong regarding your exact connection point. As Jason points it out you also need to make sure that your restart the client connection for the changes in the ceph.conf file to take effect. Regards JC Lopez Senior Technical Instructor, Global Storage Consulting Practice Red Hat, Inc. jelo...@redhat.com <mailto:jelo...@redhat.com> +1 408-680-6959 > On Oct 17, 2017, at 14:29, Josy <j...@colossuscloudtech.com> wrote: > > Thanks for the reply. > > I added rbd_non_blocking_aio = false in ceph.conf and pushed the admin file > to all nodes. > > ----- > [client] > admin socket = /var/run/ceph/$cluster-$type.$id.$pid.$cctid.asok > log file = /var/log/ceph/client.log > debug rbd = 20 > debug librbd = 20 > rbd_non_blocking_aio = false > ------ > > > However the config show command still shows it as true. > ----------- > [cephuser@ceph-las-admin-a1 ceph-cluster]$ sudo ceph --admin-daemon > /var/run/ceph/ceph-mgr.ceph-las-admin-a1.asok config show | grep > "rbd_non_blocking_aio" > "rbd_non_blocking_aio": "true", > ----------- > > Did I miss something ? > > On 18-10-2017 01:22, Jean-Charles Lopez wrote: >> Hi >> >> syntax uses the admin socket file : ceph --admin-daemon >> /var/run/ceph/$cluster-$type.$id.$pid.$cctid.asok config get rbd_cache >> >> Should be /var/run/ceph/ceph.client.admin.$pid.$cctid.asok if your >> connection is using client.admin to connect to the cluster and your cluster >> name is set to the default of ceph. But obviously can’t know from here the >> PID and the CCTID you will have to identify. >> >> You can actually do a ls /var/run/ceph to find the correct admin socket file >> >> Regards >> JC Lopez >> Senior Technical Instructor, Global Storage Consulting Practice >> Red Hat, Inc. >> jelo...@redhat.com <mailto:jelo...@redhat.com> >> +1 408-680-6959 >> >>> On Oct 17, 2017, at 12:50, Josy <j...@colossuscloudtech.com >>> <mailto:j...@colossuscloudtech.com>> wrote: >>> >>> Hi, >>> >>> >>> I am following this article : >>> >>> http://ceph.com/geen-categorie/ceph-validate-that-the-rbd-cache-is-active/ >>> <http://ceph.com/geen-categorie/ceph-validate-that-the-rbd-cache-is-active/> >>> I have enabled this flag in ceph.conf >>> >>> [client] >>> admin socket = /var/run/ceph/$cluster-$type.$id.$pid.$cctid.asok >>> log file = /var/log/ceph/ >>> >>> But the command to show the conf is not working : >>> [cephuser@ceph-las-admin-a1 ceph-cluster]$ sudo ceph --admin-daemon >>> /etc/ceph/ceph.client.admin.keyring config show >>> admin_socket: exception getting command descriptions: [Errno 111] >>> Connection refused >>> _______________________________________________ >>> ceph-users mailing list >>> ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com> >>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >>> <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com> >> >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
