Hi David,
Thank you for the great explanation of the weights, I thought that ceph
was adjusting them based on disk. But it seems it's not.
But the problem was not that I think the node was failing because a
software bug because the disk was not full anymeans.
/dev/sdb1 976284608 172396756 803887852 18%
/var/lib/ceph/osd/ceph-1
Now the question is to know if I can add again this osd safely. Is it
possible?
Best regards,
On 14/09/17 23:29, David Turner wrote:
Your weights should more closely represent the size of the OSDs. OSD3
and OSD6 are weighted properly, but your other 3 OSDs have the same
weight even though OSD0 is twice the size of OSD2 and OSD4.
Your OSD weights is what I thought you were referring to when you said
you set the crush map to 1. At some point it does look like you set
all of your OSD weights to 1, which would apply to OSD1. If the OSD
was too small for that much data, it would have filled up and be too
full to start. Can you mount that disk and see how much free space is
on it?
Just so you understand what that weight is, it is how much data the
cluster is going to put on it. The default is for the weight to be
the size of the OSD in TiB (1024 based instead of TB which is 1000).
If you set the weight of a 1TB disk and a 4TB disk both to 1, then the
cluster will try and give them the same amount of data. If you set
the 4TB disk to a weight of 4, then the cluster will try to give it 4x
more data than the 1TB drive (usually what you want).
In your case, your 926G OSD0 has a weight of 1 and your 460G OSD2 has
a weight of 1 so the cluster thinks they should each receive the same
amount of data (which it did, they each have ~275GB of data). OSD3
has a weight of 1.36380 (its size in TiB) and OSD6 has a weight of
0.90919 and they have basically the same %used space (17%) as opposed
to the same amount of data because the weight is based on their size.
As long as you had enough replicas of your data in the cluster for it
to recover from you removing OSD1 such that your cluster is health_ok
without any missing objects, then there is nothing that you need off
of OSD1 and ceph recovered from the lost disk successfully.
On Thu, Sep 14, 2017 at 4:39 PM Gonzalo Aguilar Delgado
<gagui...@aguilardelgado.com <mailto:gagui...@aguilardelgado.com>> wrote:
Hello,
I was on a old version of ceph. And it showed a warning saying:
/crush map/ has straw_calc_version=/0/
I rode that adjusting it will only rebalance all so admin should
select when to do it. So I went straigth and ran:
ceph osd crush tunables optimal
/
/It rebalanced as it said but then I started to have lots of pg
wrong. I discovered that it was because my OSD1. I thought it was
disk faillure so I added a new OSD6 and system started to
rebalance. Anyway OSD was not starting.
I thought to wipe it all. But I preferred to leave disk as it was,
and journal intact, in case I can recover and get data from it.
(See mail: [ceph-users] Scrub failing all the time, new
inconsistencies keep appearing).
So here's the information. But it has OSD1 replaced by OSD3, sorry.
ID WEIGHT REWEIGHT SIZE USE AVAIL %USE VAR PGS
0 1.00000 1.00000 926G 271G 654G 29.34 1.10 369
2 1.00000 1.00000 460G 284G 176G 61.67 2.32 395
4 1.00000 1.00000 465G 151G 313G 32.64 1.23 214
3 1.36380 1.00000 1396G 239G 1157G 17.13 0.64 340
6 0.90919 1.00000 931G 164G 766G 17.70 0.67 210
TOTAL 4179G 1111G 3067G 26.60
MIN/MAX VAR: 0.64/2.32 STDDEV: 16.99
As I said I still have OSD1 intact so I can do whatever you need
except readding to the cluster. Since I don't know what It will
do, maybe cause havok.
Best regards,
On 14/09/17 17:12, David Turner wrote:
What do you mean by "updated crush map to 1"? Can you please
provide a copy of your crush map and `ceph osd df`?
On Wed, Sep 13, 2017 at 6:39 AM Gonzalo Aguilar Delgado
<gagui...@aguilardelgado.com
<mailto:gagui...@aguilardelgado.com>> wrote:
Hi,
I'recently updated crush map to 1 and did all relocation of
the pgs. At the end I found that one of the OSD is not starting.
This is what it shows:
2017-09-13 10:37:34.287248 7f49cbe12700 -1 *** Caught signal
(Aborted) **
in thread 7f49cbe12700 thread_name:filestore_sync
ceph version 10.2.7 (50e863e0f4bc8f4b9e31156de690d765af245185)
1: (()+0x9616ee) [0xa93c6ef6ee]
2: (()+0x11390) [0x7f49d9937390]
3: (gsignal()+0x38) [0x7f49d78d3428]
4: (abort()+0x16a) [0x7f49d78d502a]
5: (ceph::__ceph_assert_fail(char const*, char const*, int,
char const*)+0x26b) [0xa93c7ef43b]
6: (FileStore::sync_entry()+0x2bbb) [0xa93c47fcbb]
7: (FileStore::SyncThread::entry()+0xd) [0xa93c4adcdd]
8: (()+0x76ba) [0x7f49d992d6ba]
9: (clone()+0x6d) [0x7f49d79a53dd]
NOTE: a copy of the executable, or `objdump -rdS
<executable>` is needed to interpret this.
--- begin dump of recent events ---
-3> 2017-09-13 10:37:34.253808 7f49dac6e8c0 5 osd.1
pg_epoch: 6293 pg[10.8c( v 6220'575937
(4942'572901,6220'575937] local-les=6235 n=282 ec=419 les/c/f
6235/6235/0 6293/6293/6290) [1,2]/[2] r=-1 lpr=0
pi=6234-6292/24 crt=6220'575937 lcod 0'0 inactive NOTIFY
NIBBLEWISE] exit Initial 0.029683 0 0.000000
-2> 2017-09-13 10:37:34.253848 7f49dac6e8c0 5 osd.1
pg_epoch: 6293 pg[10.8c( v 6220'575937
(4942'572901,6220'575937] local-les=6235 n=282 ec=419 les/c/f
6235/6235/0 6293/6293/6290) [1,2]/[2] r=-1 lpr=0
pi=6234-6292/24 crt=6220'575937 lcod 0'0 inactive NOTIFY
NIBBLEWISE] enter Reset
-1> 2017-09-13 10:37:34.255018 7f49dac6e8c0 5 osd.1
pg_epoch: 6293 pg[10.90(unlocked)] enter Initial
0> 2017-09-13 10:37:34.287248 7f49cbe12700 -1 *** Caught
signal (Aborted) **
in thread 7f49cbe12700 thread_name:filestore_sync
ceph version 10.2.7 (50e863e0f4bc8f4b9e31156de690d765af245185)
1: (()+0x9616ee) [0xa93c6ef6ee]
2: (()+0x11390) [0x7f49d9937390]
3: (gsignal()+0x38) [0x7f49d78d3428]
4: (abort()+0x16a) [0x7f49d78d502a]
5: (ceph::__ceph_assert_fail(char const*, char const*, int,
char const*)+0x26b) [0xa93c7ef43b]
6: (FileStore::sync_entry()+0x2bbb) [0xa93c47fcbb]
7: (FileStore::SyncThread::entry()+0xd) [0xa93c4adcdd]
8: (()+0x76ba) [0x7f49d992d6ba]
9: (clone()+0x6d) [0x7f49d79a53dd]
NOTE: a copy of the executable, or `objdump -rdS
<executable>` is needed to interpret this.
--- logging levels ---
0/ 5 none
0/ 1 lockdep
0/ 1 context
1/ 1 crush
1/ 5 mds
1/ 5 mds_balancer
1/ 5 mds_locker
1/ 5 mds_log
1/ 5 mds_log_expire
1/ 5 mds_migrator
0/ 1 buffer
0/ 1 timer
0/ 1 filer
0/ 1 striper
0/ 1 objecter
0/ 5 rados
0/ 5 rbd
0/ 5 rbd_mirror
0/ 5 rbd_replay
0/ 5 journaler
0/ 5 objectcacher
0/ 5 client
0/ 5 osd
0/ 5 optracker
0/ 5 objclass
1/ 3 filestore
1/ 3 journal
0/ 5 ms
1/ 5 mon
0/10 monc
1/ 5 paxos
0/ 5 tp
1/ 5 auth
1/ 5 crypto
1/ 1 finisher
1/ 5 heartbeatmap
1/ 5 perfcounter
1/ 5 rgw
1/10 civetweb
1/ 5 javaclient
1/ 5 asok
1/ 1 throttle
0/ 0 refs
1/ 5 xio
1/ 5 compressor
1/ 5 newstore
1/ 5 bluestore
1/ 5 bluefs
1/ 3 bdev
1/ 5 kstore
4/ 5 rocksdb
4/ 5 leveldb
1/ 5 kinetic
1/ 5 fuse
-2/-2 (syslog threshold)
-1/-1 (stderr threshold)
max_recent 10000
max_new 1000
log_file /var/log/ceph/ceph-osd.1.log
--- end dump of recent events ---
Is there any way to recover it or should I open a bug?
Best regards
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
