System: Ubuntu Trusty 14.04
Release : Kraken
Issue:
When starting ceph-osd daemon on boot via upstart. Error message in
/var/log/upstart/ceph-osd-ceph_#.log reports 3 attempt to start the service
with the errors message below
starting osd.12 at - osd_data /var/lib/ceph/osd/ceph-12
/var/lib/ceph/osd/ceph-12/journal
2017-05-09 13:38:34.507004 7f6d46a2e980 -1 journal FileJournal::_open:
disabling aio for non-block journal. Use journal_force_aio to force use of aio
anyway
2017-05-09 13:38:38.432333 7f6d46a2e980 -1 osd.12 2284024 PGs are upgrading
unable to look up group 'ceph': (34) Numerical result out of range
unable to look up group 'ceph': (34) Numerical result out of range
unable to look up group 'ceph': (34) Numerical result out of range
Workaround:
If I configure /etc/init/ceph-osd.conf like so
-respawn limit 3 1800
+respawn limit unlimited
I get roughly 20 attempts to start the each osd daemon and then it successfully
starts.
Starting the daemons by hand works just fine after boot.
Possible reasons:
NSCD is being utilized and may not have started yet. However disabling this
service doesn’t not improve starting the service without the workaround in
place.
The message seems to be coming global/global_init.cc
./global/global_init.cc- struct passwd *p = 0;
./global/global_init.cc- getpwnam_r(g_conf->setuser.c_str(), &pa, buf,
sizeof(buf), &p);
./global/global_init.cc- if (!p) {
./global/global_init.cc- cerr << "unable to look up user '" << g_conf->setuser
<< "'"
./global/global_init.cc- << std::endl;
./global/global_init.cc- exit(1);
./global/global_init.cc- }
./global/global_init.cc- uid = p->pw_uid;
./global/global_init.cc- gid = p->pw_gid;
./global/global_init.cc- uid_string = g_conf->setuser;
./global/global_init.cc- }
./global/global_init.cc- }
./global/global_init.cc- if (g_conf->setgroup.length() > 0) {
./global/global_init.cc- gid = atoi(g_conf->setgroup.c_str());
./global/global_init.cc- if (!gid) {
./global/global_init.cc- char buf[4096];
./global/global_init.cc- struct group gr;
./global/global_init.cc- struct group *g = 0;
./global/global_init.cc- getgrnam_r(g_conf->setgroup.c_str(), &gr, buf,
sizeof(buf), &g);
./global/global_init.cc- if (!g) {
./global/global_init.cc: cerr << "unable to look up group '" <<
g_conf->setgroup << "'"
./global/global_init.cc- << ": " << cpp_strerror(errno) << std::endl;
./global/global_init.cc- exit(1);
./global/global_init.cc- }
./global/global_init.cc- gid = g->gr_gid;
./global/global_init.cc- gid_string = g_conf->setgroup;
./global/global_init.cc- }
./global/global_init.cc- }
34 as an error code seems to correspond to ERANGE Insufficient buffer space
supplied. I assume this is because getgrnam_r() returns NULL if it can’t find
the group.
But as to why the group isn’t retrievable I have no idea, As
getent group ceph
ceph:x:59623:ceph
GID changed for security reasons.
Additional Information:
I also see this in boot.log not sure if it is related
failed: 'ulimit -n 32768; /usr/bin/ceph-mds -i cephstorelx2 --pid-file
/var/run/ceph/mds.cephstorelx2//mds.cephstorelx2.pid -c /etc/ceph/ceph.conf
--cluster ceph --setuser ceph --setgroup ceph '
Any pointers would be helpful.
-Zach
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
