Thanks a lot.

On Fri, Oct 7, 2016 at 2:19 PM Daleep Singh Bais <daleepb...@gmail.com>
wrote:

> Hi,
>
> Ceph uses other ports also for other daemons like OSD and MDS. Please
> refer to
>
> http://docs.ceph.com/docs/jewel/rados/configuration/network-config-ref/
>
> This might help you to resolve the issue.
>
> Thanks.
>
>
> Daleep Singh Bais
>
>
> On 10/07/2016 10:14 AM, Jaemyoun Lee wrote:
>
> Dear Laizer,
>
> Oh, I got it. the rbd was created successfully after I disabled the
> firewall.
> However, when the firewall is enabled and the 6789 port is allowed, the
> authentication error is occurred.
>
> Is there any other port?
>
> On Fri, Oct 7, 2016 at 1:23 PM Lomayani S. Laizer <lomlai...@gmail.com>
> wrote:
>
> Hello Lee,
> Yes check can be firewall. Make sure port used by ceph are open
>
> --
> Lomayani
>
> On Fri, Oct 7, 2016 at 6:44 AM, Jaemyoun Lee <jaemy...@hanyang.ac.kr>
> wrote:
>
> Dear Laizer,
>
> I did deploy the configuration and the key by '$ ceph-deploy admin
> client-node' on admin-node.
>     jae@client-node$ ls /etc/ceph
>     ceph.client.admin.keyring  ceph.conf  rbdmap  tmpoWLFTb
>
>
>
>
> On Fri, Oct 7, 2016 at 12:33 PM Lomayani S. Laizer <lomlai...@gmail.com>
> wrote:
>
> Hello Lee,
> Make sure you have copied configuration and key for authentication
> (ceph.client.admin.keyring) to client node. Looks it is an authentication
> issue due to missing client key
>
>
> --
> Lomayani
>
> On Fri, Oct 7, 2016 at 5:25 AM, Jaemyoun Lee <jaemy...@hanyang.ac.kr>
> wrote:
>
> Hi,
> I would like to create a rbd on client-node.
>
> I created a cluster on admin-node successfully.
>     jae@admin-node$ ceph health
>     HEALTH_OK
>
> A rbd was created on admin-node successfully.
>     jae@admin-node$ rbd created foo --size 1024
>
>
> However, when I created a rbd on client-node, the error was occurred:
>     jae@client-node$ rbd create foo --size 1024
>     2016-10-06 05:15:35.773242 7f3a52f367c0  0 monclient(hunting):
> authenticate timed out after 300
>     2016-10-06 05:15:35.775497 7f3a52f367c0  0 librados: client.admin
> authentication error (110) Connection timed out
>
> I guess the firewall is right because I can connect from client-node to
> admin-node by ssh.
>
> May you talk me what is wrong?
>
> I referred the following site:
> http://docs.ceph.com/docs/master/start/quick-rbd/
>
> Best regards,
> Jae
>
> ------------------------------
>
>
> 위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되는 것으로 보안을 유지해야 하는 정보와 법률상 및 기타 사유로 공개가 금지된
> 정보가 포함돼 있을 수 있습니다.
>
> 귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에 포함된 정보의 전부 또는 일부를 무단으로 보유, 사용하거나 제3자에게 공개,
> 복사, 전송, 배포해서는 안 됩니다.
>
> 본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락해주시고, 메일을 즉시 삭제해 주시기 바랍니다. 협조해 주셔서 감사합니다.
>
>
> This e-mail is intended only for the named recipient.
>
> Dissemination, distribution, forwarding, or copying of this e-mail by
> anyone other than the intended recipient is prohibited.
>
> If you have received it in error, please notify the sender by e-mail and
> completely delete it. Thank you for your cooperation.
> ------------------------------
>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@lists.ceph.com
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
>
>
> ------------------------------
>
>
> 위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되는 것으로 보안을 유지해야 하는 정보와 법률상 및 기타 사유로 공개가 금지된
> 정보가 포함돼 있을 수 있습니다.
>
> 귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에 포함된 정보의 전부 또는 일부를 무단으로 보유, 사용하거나 제3자에게 공개,
> 복사, 전송, 배포해서는 안 됩니다.
>
> 본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락해주시고, 메일을 즉시 삭제해 주시기 바랍니다. 협조해 주셔서 감사합니다.
>
>
> This e-mail is intended only for the named recipient.
>
> Dissemination, distribution, forwarding, or copying of this e-mail by
> anyone other than the intended recipient is prohibited.
>
> If you have received it in error, please notify the sender by e-mail and
> completely delete it. Thank you for your cooperation.
> ------------------------------
>
>
>
> ------------------------------
>
>
> 위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되는 것으로 보안을 유지해야 하는 정보와 법률상 및 기타 사유로 공개가 금지된
> 정보가 포함돼 있을 수 있습니다.
>
> 귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에 포함된 정보의 전부 또는 일부를 무단으로 보유, 사용하거나 제3자에게 공개,
> 복사, 전송, 배포해서는 안 됩니다.
>
> 본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락해주시고, 메일을 즉시 삭제해 주시기 바랍니다. 협조해 주셔서 감사합니다.
>
>
> This e-mail is intended only for the named recipient.
>
> Dissemination, distribution, forwarding, or copying of this e-mail by
> anyone other than the intended recipient is prohibited.
>
> If you have received it in error, please notify the sender by e-mail and
> completely delete it. Thank you for your cooperation.
> ------------------------------
>
>
>
> _______________________________________________
> ceph-users mailing 
> listceph-us...@lists.ceph.comhttp://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
>
>

-------------------------------------------------------------------------------------------------------------------------------------------
위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되는 것으로 보안을 유지해야 하는 정보와 법률상 및 기타 사유로 공개가 금지된 정보가 
포함돼 있을 수 있습니다. 
귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에 포함된 정보의 전부 또는 일부를 무단으로 보유, 사용하거나 제3자에게 공개, 복사, 
전송, 배포해서는 안 됩니다. 
본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락해주시고, 메일을 즉시 삭제해 주시기 바랍니다. 협조해 주셔서 감사합니다.

This e-mail is intended only for the named recipient. 
Dissemination, distribution, forwarding, or copying of this e-mail by anyone 
other than the intended recipient is prohibited. 
If you have received it in error, please notify the sender by e-mail and 
completely delete it. Thank you for your cooperation.
-------------------------------------------------------------------------------------------------------------------------------------------
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to