I did use ceph-ansible to deploy the gateway -- using the default settings. It should work out of the box but does not.
So... can the radosgw-admin CLI utility take a keyring path in the conf file or does the path need to be manually specified? And secondly, after copying the keyring to one of the default locations, I tried using the client.admin and radosgw.rgw ids you mentioned but neither worked: [vagrant@ceph-rgw0 ~]$ sudo radosgw-admin --id radosgw.rgw usage show 2016-06-01 21:34:20.884525 7f2e5e01aa40 0 librados: client.radosgw.rgw authentication error (22) Invalid argument couldn't init storage provider [vagrant@ceph-rgw0 ~]$ sudo radosgw-admin --id client.admin usage show 2016-06-01 21:34:31.699323 7fe774f96a40 0 librados: client.client.admin authentication error (22) Invalid argument couldn't init storage provider And what page were you referring to? I didn't see a link in the email. On Wed, Jun 1, 2016 at 4:30 PM, LOPEZ Jean-Charles <jelo...@redhat.com> wrote: > Hi, > > radosgw-admin is not radosgw. It’s the RADDOS Gateway cli admin utility. > > All ceph components by default use the client.admin user name to connect > to the Ceph cluster. If you deployed the radosgw, the gateway itself was > properly configured by Ansible and the files were placed where they have to > be. > > To override, look at the following page and use the appropriate command > line option to specify the proper user name or user id (--id or --name): > e.g. radosgw-admin --id radosgw.rgw usage show > > Regards > JC > > > On Jun 1, 2016, at 14:07, RJ Nowling <rnowl...@redhat.com> wrote: > > Hi all, > > I'm trying to set up a Ceph cluster with an S3 gateway using the > ceph-ansible playbooks. I'm running into an issue where the radosgw-admin > client can't find the keyring. The path to the keyring is listed in the > ceph.conf file. I confirmed with strace that the client opens the conf > file but doesn't open the path given in the conf file -- only the default > keyring paths. > > Here's the output: > > [vagrant@ceph-rgw0 ~]$ sudo radosgw-admin usage show > 2016-06-01 13:36:17.294935 7fe45ac80a40 -1 auth: unable to find a keyring > on > /etc/ceph/ceph.client.admin.keyring,/etc/ceph/ceph.keyring,/etc/ceph/keyring,/etc/ceph/keyring.bin: > (2) No such file or directory > 2016-06-01 13:36:17.300732 7fe45ac80a40 -1 monclient(hunting): > authenticate NOTE: no keyring found; disabled cephx authentication > 2016-06-01 13:36:17.300737 7fe45ac80a40 0 librados: client.admin > authentication error (95) Operation not supported > couldn't init storage provider > > Here's the relevant part of the config file: > > [client.radosgw.rgw0] > host = ceph-rgw0 > keyring = /var/lib/ceph/radosgw/ceph-rgw.ceph-rgw0/keyring > rgw socket path = /tmp/radosgw-ceph-rgw0.sock > log file = /var/log/ceph/ceph-rgw-ceph-rgw0.log > rgw data = /var/lib/ceph/radosgw/ceph-rgw.ceph-rgw0 > rgw frontends = civetweb port=10.0.2.15:8080 num_threads=50 > > When I copy the keyring to /etc/ceph/keyring, the keyring is found but I > get a different error: > > [vagrant@ceph-rgw0 ~]$ sudo radosgw-admin usage show > 2016-06-01 21:07:22.677525 7f62f2e38a40 0 librados: client.admin > authentication error (22) Invalid argument > couldn't init storage provider > > Any insights would be greatly appreciated! > > Thanks! > RJ > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
