Florian, Check your cephx auth to make sure you're allowing access to the overlay pool as well as the cold storage pool.
Bob On Sat, Nov 28, 2015 at 6:40 AM, Florian Rommel < florian.rom...@datalounges.com> wrote: > Hi, I have a bit of a problem. I have a fully functioning cep cluster. > Each server has an SSD drive that we would like to use as a cache pool and > 6 1.7TB data drives that we would like to put as erasure coded drive. > > Yes I would ike to put a cache pool overlaid to the Erasure pool. > Cep version is 0.94. > I can create both pools by applying a different ruleset. and they LOOK to > be ok. But as soon as I overlay the cache pool, I cannot access any pool at > all . red create -s 1024 -p test merely sits there doing nothing. on the > cep servers there is no response. > If i create a replicated pool out of the SSD disks or the SATA disks, red > works fine. > > doing an osd tree gives the correct drive list and even separates suds > from the rest, so its all good there. > > If there something specific i need to do about the overlay pool? I did set > the hit flag to bloom etc.. just like it is described on ceph.com .. > still no dice. > > Does anyone here have a setup like this and can give me a hand? > > So multiple servers, each with 1 SSD and multiple other drives that are > marked for erasure pool usage. > > > Thank you and best regards, > //Florian > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
