Hard to know without more config details such as no of servers, network – GigE or !0 GigE, also not sure how you are measuring, (reads or writes) you could try RADOS bench as a baseline, I would expect more performance with 7 X 10K spinners journaled to SSDs. The fact that SSDs did not perform much better may mean to a bottleneck elsewhere – network perhaps? From: Marek Dohojda [mailto:mdoho...@altitudedigital.com] Sent: Tuesday, November 24, 2015 10:37 AM To: Alan Johnson Cc: Haomai Wang; ceph-users@lists.ceph.com Subject: Re: [ceph-users] Performance question
Yeah they are, that is one thing I was planning on changing, What I am really interested at the moment, is vague expected performance. I mean is 100MB around normal, very low, or "could be better"? On Tue, Nov 24, 2015 at 8:02 AM, Alan Johnson <al...@supermicro.com<mailto:al...@supermicro.com>> wrote: Are the journals on the same device – it might be better to use the SSDs for journaling since you are not getting better performance with SSDs? From: ceph-users [mailto:ceph-users-boun...@lists.ceph.com<mailto:ceph-users-boun...@lists.ceph.com>] On Behalf Of Marek Dohojda Sent: Monday, November 23, 2015 10:24 PM To: Haomai Wang Cc: ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com> Subject: Re: [ceph-users] Performance question Sorry I should have specified SAS is the 100 MB :) , but to be honest SSD isn't much faster. On Mon, Nov 23, 2015 at 7:38 PM, Haomai Wang <haomaiw...@gmail.com<mailto:haomaiw...@gmail.com>> wrote: On Tue, Nov 24, 2015 at 10:35 AM, Marek Dohojda <mdoho...@altitudedigital.com<mailto:mdoho...@altitudedigital.com>> wrote: > No SSD and SAS are in two separate pools. > > On Mon, Nov 23, 2015 at 7:30 PM, Haomai Wang > <haomaiw...@gmail.com<mailto:haomaiw...@gmail.com>> wrote: >> >> On Tue, Nov 24, 2015 at 10:23 AM, Marek Dohojda >> <mdoho...@altitudedigital.com<mailto:mdoho...@altitudedigital.com>> wrote: >> > I have a Hammer Ceph cluster on 7 nodes with total 14 OSDs. 7 of which >> > are >> > SSD and 7 of which are SAS 10K drives. I get typically about 100MB IO >> > rates >> > on this cluster. So which pool you get with 100 MB? >> >> You mixed up sas and ssd in one pool? >> >> > >> > I have a simple question. Is 100MB within my configuration what I >> > should >> > expect, or should it be higher? I am not sure if I should be looking for >> > issues, or just accept what I have. >> > >> > _______________________________________________ >> > ceph-users mailing list >> > ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com> >> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > >> >> >> >> -- >> Best Regards, >> >> Wheat > > -- Best Regards, Wheat
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
