Hello Community Need your help in understanding this.
I have the below node, which is hosting 60 physical disks, running 1 OSD per disk so total 60 Ceph OSD daemons *[root@node01 ~]# service ceph status | grep -i osd | grep -i running | wc -l* *60* *[root@node01 ~]#* However if i check OSD processes it shows that there are 120 OSD process are running. *[root@node01 ~]# ps -ef | grep -i osd | grep -v grep | wc -l* *120* *[root@node01 ~]#* *Question 1 : why its 120 processes ? , i it should be 60 (because of 60 OSD on the system)* My guess : is this because of multithreading ? Now if i check the number of ports used by OSD its comming out to be 240 *[root@node01 ~]# netstat -plunt | grep -i osd | wc -l* *240* *[root@node01 ~]#* *Question 2 : Now why its 240 ports ? It should be 60 ( because of 60 OSD on the system)* If i grep a specific OSD port , its shows 2 ports are occupied by OSD process 260519 *[root@node01 ~]# netstat -plunt | grep -i osd | grep -i 6819* *tcp 0 0 10.101.50.1:6819 <http://10.101.50.1:6819> 0.0.0.0:* LISTEN 260519/ceph-osd* *tcp 0 0 10.102.50.1:6819 <http://10.102.50.1:6819> 0.0.0.0:* LISTEN 260519/ceph-osd* *[root@node01 ~]#* *Question 3 : Now based on the scenario 2 it should be 4 ( so 60 OSD x 4 ports = 240 ports in total)* I have two public and cluster network configured in ceph.conf , is all these because of two different networks ? *I would really appreciate if some knowledgeable person share his understanding with me.* Thank you in advance.
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
