No, dmesg is clean on both hosts of osd.1 (block0) and osd.7 (block2). There are only boot time messages (listings below). If there is cable or SATA-controller issues, will it be shown in /var/log/dmesg?
block0 dmesg: [ 5.296302] XFS (sdb1): Mounting V4 Filesystem [ 5.316487] XFS (sda1): Mounting V4 Filesystem [ 5.464439] XFS (sdb1): Ending clean mount [ 5.464466] SELinux: initialized (dev sdb1, type xfs), uses xattr [ 5.506185] XFS (sda1): Ending clean mount [ 5.506214] SELinux: initialized (dev sda1, type xfs), uses xattr [ 5.649101] XFS (sdc1): Ending clean mount [ 5.649129] SELinux: initialized (dev sdc1, type xfs), uses xattr [ 5.668062] systemd-journald[500]: Received request to flush runtime journal from PID 1 [ 5.786559] type=1305 audit(1438754525.356:4): audit_pid=629 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 5.870809] snd_hda_intel 0000:00:1b.0: Codec #2 probe error; disabling it... [ 5.976594] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 5.976604] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.976609] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.976613] sound hdaudioC0D0: mono: mono_out=0x0 [ 5.976617] sound hdaudioC0D0: dig-out=0x11/0x0 [ 5.976621] sound hdaudioC0D0: inputs: [ 5.976627] sound hdaudioC0D0: Rear Mic=0x18 [ 5.976632] sound hdaudioC0D0: Front Mic=0x19 [ 5.976637] sound hdaudioC0D0: Line=0x1a [ 5.976641] sound hdaudioC0D0: CD=0x1c block2 dmesg: [ 4.987126] XFS (sda1): Mounting V4 Filesystem [ 4.990737] raid6: sse2x1 601 MB/s [ 5.007765] raid6: sse2x2 632 MB/s [ 5.024711] raid6: sse2x4 1316 MB/s [ 5.024717] raid6: using algorithm sse2x4 (1316 MB/s) [ 5.024720] raid6: using ssse3x2 recovery algorithm [ 5.046099] XFS (sda1): Ending clean mount [ 5.046126] SELinux: initialized (dev sda1, type xfs), uses xattr [ 5.074257] Btrfs loaded [ 5.075283] BTRFS: device fsid a3176b6c-2e2b-4121-9dc3-f191d469eccc devid 1 transid 287115 /dev/sdc [ 5.098721] Adding 4882428k swap on /dev/mapper/root-swap00. Priority:-1 extents:1 across:4882428k SSFS [ 5.157349] XFS (sdc1): Mounting V4 Filesystem [ 5.222992] XFS (sdb1): Mounting V4 Filesystem [ 5.362687] XFS (sdc1): Ending clean mount [ 5.362738] SELinux: initialized (dev sdc1, type xfs), uses xattr [ 5.417178] XFS (sdb1): Ending clean mount [ 5.417208] SELinux: initialized (dev sdb1, type xfs), uses xattr [ 5.429280] systemd-journald[497]: Received request to flush runtime journal from PID 1 [ 5.533922] type=1305 audit(1438754526.111:4): audit_pid=626 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 пт, 7 авг. 2015 г. в 14:08, Межов Игорь Александрович <me...@yuterra.ru>: > Hi! > > Do you have any disk errors in dmesg output? In our practice, every time > the deep > scrub found inconsistent PG, we also found a disk error, that was the > reason. > Sometimes it was media errors (bad sectors), one time - bad sata cable and > we also had some raid/hba firmware issues. But in all cases, when we see > inconsistent > PG - we also see disk errors. So, please, check them at your cluster > firstly. > > Megov Igor > CIO, Yuterra > > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
