It seems to be a RHEL licensing issue. We got RHEL partner licenses, but we’d have to pay for ceph repo access, but when I use the RHEL repos I can only get 80.7. It many hours to work through that and even get that to install so that I can get to the point that it fails to make the partition.
I’d rather go back to Centos. From: Shane Gibson [mailto:shane_gib...@symantec.com] Sent: Friday, June 26, 2015 2:26 PM To: Bruce McFarland; ceph-users@lists.ceph.com Subject: Re: [ceph-users] RHEL 7.1 ceph-disk failures creating OSD Bruce - I ran in to problems w/ ceph-disk on same version too - then switched to Hammer (0.94) ... that worked for me. I didn't track the issue down. Some reason you are deploying an older version ? On 6/26/15, 2:09 PM, "ceph-users on behalf of Bruce McFarland" <ceph-users-boun...@lists.ceph.com<mailto:ceph-users-boun...@lists.ceph.com> on behalf of bruce.mcfarl...@taec.toshiba.com<mailto:bruce.mcfarl...@taec.toshiba.com>> wrote: I have moved storage nodes to RHEL 7.1 and used the basic server install. I installed ceph-deploy and used the ceph.repo/epel.repo for installation of ceph 80.7. I have tried ceph-disk with issuing “zap” on the same command line as “prepare” and on a separate command line immediately before the ceph-disk prepare. I consistently run into the partition errors and am unable to create OSD’s on RHEL 7.1. ceph-disk prepare --cluster ceph --cluster-uuid 373a09f7-2070-4d20-8504-c8653fb6db80 --fs-type xfs --zap-disk /dev/disk/by-id/wwn-0x500003959ba80a4e /dev/disk/by-id/wwn-0x500080d9101001d6-part1 Caution: invalid backup GPT header, but valid main header; regenerating backup header from main header. **************************************************************************** Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk verification and recovery are STRONGLY recommended. **************************************************************************** GPT data structures destroyed! You may now partition the disk using fdisk or other utilities. The operation has completed successfully. WARNING:ceph-disk:OSD will not be hot-swappable if journal is not the same device as the osd data The operation has completed successfully. meta-data=/dev/sdc1 isize=2048 agcount=4, agsize=244188597 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 finobt=0 data = bsize=4096 blocks=976754385, imaxpct=5 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal log bsize=4096 blocks=476930, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 The operation has completed successfully. partx: /dev/disk/by-id/wwn-0x500003959ba80a4e: error adding partition 1
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
