Hi,
    I got these message when I remount:
2015-04-30 15:47:58.199837 7f9ad30a27c0 -1 asok(0x3c83480)
AdminSocketConfigObs::init: failed: AdminSocket::bind_and_listen: failed to
bind the UNIX domain socket to '/var/run/ceph/ceph-client.admin.asok': (17)
File exists
fuse: bad mount point `ceph-fuse': No such file or directory
ceph-fuse[2576]: fuse failed to initialize
2015-04-30 15:47:58.199980 7f9ad30a27c0 -1 init, newargv = 0x3ca9b00
newargc=14
2015-04-30 15:47:58.200020 7f9ad30a27c0 -1 fuse_parse_cmdline failed.
ceph-fuse[2574]: mount failed: (22) Invalid argument.

    It seems that FUSE doesn't support remount? This link
<http://ceph-users.ceph.narkive.com/SOhYIj0S/ceph-fuse-remount> is google
result.

    I am using ceph-dokan too. And I got the similar memory problem. I
don't know if it is the same problem. I switched to use kernel module and
Samba to replace previous solution temporarily.
    I'm trying to read and track the ceph & ceph-dokan source code to find
more useful information.


    I don't know if my previous email arrived the list(Maybe the attachment
is too large). Here is its content:

I wrote a test case with Python:
'''
import os
for i in range(200):
        dir_name = '/srv/ceph_fs/test/d%s'%i
        os.mkdir(dir_name)
        for j in range(3):
                with open('%s/%s'%(dir_name, j), 'w') as f:
                        f.write('0')
'''

The output of status command after test on a fresh mount:
{
    "metadata": {
        "ceph_sha1": "e4bfad3a3c51054df7e537a724c8d0bf9be972ff",
        "ceph_version": "ceph version 0.94.1
(e4bfad3a3c51054df7e537a724c8d0bf9be972ff)",
        "entity_id": "admin",
        "hostname": "local-share-server",
        "mount_point": "\/srv\/ceph_fs"
    },
    "dentry_count": 204,
    "dentry_pinned_count": 201,
    "inode_count": 802,
    "mds_epoch": 25,
    "osd_epoch": 177,
    "osd_epoch_barrier": 176
}
It seems that all pinned dentrys are directories from dump cache command
output.

Attachment
<https://www.dropbox.com/s/yuq2lfcuk0ihhyr/ceph.debug.log.tar.gz?dl=0> is a
package of debug log and dump cache content.


On Thu, Apr 30, 2015 at 2:55 PM Yan, Zheng <uker...@gmail.com> wrote:

> On Wed, Apr 29, 2015 at 4:33 PM, Dexter Xiong <dxtxi...@gmail.com> wrote:
> > The output of status command of fuse daemon:
> > "dentry_count": 128966,
> > "dentry_pinned_count": 128965,
> > "inode_count": 409696,
> > I saw the pinned dentry is nearly the same as dentry.
> > So I enabled debug log(debug client = 20/20) and  read  Client.cc source
> > code in general. I found that an entry will not be trimed if it is
> pinned.
> > But how can I unpin dentrys?
>
> Maybe these dentries are pinned by fuse kernel module (ceph-fuse does
> not try trimming kernel cache when its cache size >
> client_cache_size). Could you please run "mount -o remount <mount
> point>", then run the status command again. check if number of pinned
> dentries drops.
>
> Regards
> Yan, Zheng
>
>
> >
> > On Wed, Apr 29, 2015 at 12:19 PM Dexter Xiong <dxtxi...@gmail.com>
> wrote:
> >>
> >> I tried set client cache size = 100, but it doesn't solve the problem.
> >> I tested ceph-fuse with kernel version 3.13.0-24 3.13.0-49 and
> 3.16.0-34.
> >>
> >>
> >>
> >> On Tue, Apr 28, 2015 at 7:39 PM John Spray <john.sp...@redhat.com>
> wrote:
> >>>
> >>>
> >>>
> >>> On 28/04/2015 06:55, Dexter Xiong wrote:
> >>> > Hi,
> >>> >     I've deployed a small hammer cluster 0.94.1. And I mount it via
> >>> > ceph-fuse on Ubuntu 14.04. After several hours I found that the
> >>> > ceph-fuse process crashed. The end is the crash log from
> >>> > /var/log/ceph/ceph-client.admin.log. The memory cost of ceph-fuse
> >>> > process was huge(more than 4GB) when it crashed.
> >>> >     Then I did some test and found these actions will increase memory
> >>> > cost of ceph-fuse rapidly and the memory cost never seem to decrease:
> >>> >
> >>> >   * rsync command to sync small files(rsync -a /mnt/some_small
> >>> > /srv/ceph)
> >>> >   * chown command/ chmod command(chmod 775 /srv/ceph -R)
> >>> >
> >>> > But chown/chmod command on accessed files will not increase the
> memory
> >>> > cost.
> >>> > It seems that ceph-fuse caches the file nodes but never releases
> them.
> >>> > I don't know if there is an option to control the cache size. I
> >>> > set mds cache size = 2147483647 option to improve the performance of
> >>> > mds, and I tried to set mds cache size = 1000 at client side but it
> >>> > doesn't effect the result.
> >>>
> >>> The setting for client-side cache limit is "client cache size", default
> >>> is 16384
> >>>
> >>> What kernel version are you using on the client?  There have been some
> >>> issues with cache trimming vs. fuse in recent kernels, but we thought
> we
> >>> had workarounds in place...
> >>>
> >>> Cheers,
> >>> John
> >>>
> >
> > _______________________________________________
> > ceph-users mailing list
> > ceph-users@lists.ceph.com
> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >
>
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to