That’s what I usually do to check if rgw is running with no problems: sudo radosgw -c ceph.conf -d
I already pumped up the log level, but I can’t see any change or verbosity level increase of the logs, I still get the same: 2015-02-14 22:27:57.513151 7f26c79d27c0 0 ceph version 0.80.7 (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 7924 2015-02-14 22:27:57.573564 7f26c79d27c0 0 framework: fastcgi 2015-02-14 22:27:57.573569 7f26c79d27c0 0 starting handler: fastcgi 2015-02-14 22:27:57.575349 7f269affd700 0 ERROR: FCGX_Accept_r returned -9 2015-02-14 22:27:57.670610 7f269bfff700 0 ERROR: can't read user header: ret=-2 2015-02-14 22:27:57.670613 7f269bfff700 0 ERROR: sync_user() failed, user=cephtest ret=-2 2015-02-14 22:27:57.671382 7f269bfff700 0 ERROR: can't read user header: ret=-2 2015-02-14 22:27:57.671384 7f269bfff700 0 ERROR: sync_user() failed, user=cephtestss ret=-2 ^C2015-02-14 22:28:30.693140 7f269b7fe700 1 handle_sigterm 2015-02-14 22:28:30.693170 7f269b7fe700 1 handle_sigterm set alarm for 120 2015-02-14 22:28:30.693179 7f26c79d27c0 -1 shutting down 2015-02-14 22:28:30.717340 7f26c79d27c0 1 final shutdown Please let me know if I can do something more .. Now I have 2 questions: 1- what RADOS user you refer to? 2- How would I know that I use wrong cephx keys unless I see authentication error or relevant warning? Thanks! Beanos > On Feb 14, 2015, at 11:29 PM, Yehuda Sadeh-Weinraub <yeh...@redhat.com> wrote: > > > > From: "B L" <super.itera...@gmail.com> > To: "Yehuda Sadeh-Weinraub" <yeh...@redhat.com> > Cc: ceph-users@lists.ceph.com > Sent: Saturday, February 14, 2015 11:03:42 AM > Subject: Re: [ceph-users] Having problem to start Radosgw > > Hello Yehyda, > > The strace command you referred to me, shows this: > https://gist.github.com/anonymous/8e9f1ced485996a263bb > <https://gist.github.com/anonymous/8e9f1ced485996a263bb> > > Additionally, I traced this log file: > /var/log/radosgw/ceph-client.radosgw.gateway > > it has the following: > > 2015-02-12 18:23:32.247679 7fecca5257c0 -1 did not load config file, using > default settings. > 2015-02-12 18:23:32.247745 7fecca5257c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 20477 > 2015-02-12 18:23:32.251192 7fecca5257c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-12 18:23:58.494026 7faab31377c0 -1 did not load config file, using > default settings. > 2015-02-12 18:23:58.494092 7faab31377c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 20509 > 2015-02-12 18:23:58.497420 7faab31377c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-14 17:13:03.478688 7f86f09567c0 -1 did not load config file, using > default settings. > 2015-02-14 17:13:03.478778 7f86f09567c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 2989 > 2015-02-14 17:13:03.482850 7f86f09567c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-14 17:13:29.477530 7ff18226a7c0 -1 did not load config file, using > default settings. > 2015-02-14 17:13:29.477595 7ff18226a7c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 3033 > 2015-02-14 17:13:29.481173 7ff18226a7c0 -1 Couldn't init storage provider > (RADOS) > 2015-02-14 17:21:00.950847 7ffee3a3b7c0 -1 did not load config file, using > default settings. > 2015-02-14 17:21:00.950916 7ffee3a3b7c0 0 ceph version 0.80.7 > (6c0127fcb58008793d3c8b62d925bc91963672a3), process radosgw, pid 3086 > 2015-02-14 17:21:00.954085 7ffee3a3b7c0 -1 Couldn't init storage provider > (RADOS) > > > > Turns out to be that the last line of the logs is thrown out by this piece of > code in rgw_main.cc: > > … > … > > FCGX_Init(); > > RGWStoreManager store_manager; > > if (!store_manager.init("rados", g_ceph_context)) { > derr << "Couldn't init storage provider (RADOS)" << dendl; > return EIO; > } > > RGWProcess process(g_ceph_context, 20); > > process.run(); > > return 0; > > N.B. you can find it > in:(http://workbench.dachary.org/ceph/ceph/raw/8d63e140777bbdd061baa6845d57e6c3cc771f76/src/rgw/rgw_main.cc > > <http://workbench.dachary.org/ceph/ceph/raw/8d63e140777bbdd061baa6845d57e6c3cc771f76/src/rgw/rgw_main.cc>) > , 10th line from below. > > Is that by any means related to the problem? > > Not related. This actually means that it couldn't connect to the rados > backend, so there's a different issue now. The strace log doesn't provide > much with regard to the original issue as it didn't get to that part now. You > can try bumping up the debug level (debug rgw = 20, debug ms = 1). I assume > that the issue that you're seeing is that the wrong rados user and/or wrong > cephx keys are being used. Try to run it again as you do usually, and see > what the regular params that are being passed when starting radosgw; use > these when running the strace command. > > Yehuda > > > > On Feb 14, 2015, at 7:24 PM, Yehuda Sadeh-Weinraub <yeh...@redhat.com > <mailto:yeh...@redhat.com>> wrote: > > sudo strace -F -T -tt -o/tmp/strace.out radosgw -c ceph.conf -f > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
