I upgraded my cluster to .80.1-2 (CentOS). My mount command just freezes
and outputs an error:
mount.ceph 192.168.0.14,192.168.0.15,192.168.0.16:/ /us-west01 -o
name=chefwks01,secret=`ceph-authtool -p -n client.admin
/etc/ceph/us-west01.client.admin.keyring`
mount error 5 = Input/output error
Here's the output from 'ceph -s'
cluster xxxxxxxxxxxxxxxxxxxxxx
health HEALTH_OK
monmap e1: 3 mons at {ceph-mon01=
192.168.0.14:6789/0,ceph-mon02=192.168.0.15:6789/0,ceph-mon03=192.168.0.16:6789/0},
election epoch 88, quorum 0,1,2 ceph-mon01,ceph-mon02,ceph-mon03
mdsmap e26: 1/1/1 up {0=0=up:active}
osdmap e1371: 5 osds: 5 up, 5 in
pgmap v49431: 192 pgs, 3 pools, 135 GB data, 34733 objects
406 GB used, 1874 GB / 2281 GB avail
192 active+clean
I can see some packets being exchanged between the client and the mon, but
it's a pretty short exchange.
Any ideas where to look next?
Joshua
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
