Hello,
the ceph command hangs after execution (doing what it is supposed to do)
following an update on one Jessie machine today.
---
# ceph -s
cluster d6b84616-ff3e-4b04-b50b-bd398d7fa69a
health HEALTH_OK
monmap e1: 3 mons at
{c-admin=10.0.0.10:6789/0,ceph-01=10.0.0.41:6789/0,ceph-02=10.0.0.42:6789/0},
election epoch 86, quorum 0,1,2 c-admin,ceph-01,ceph-02
osdmap e1676: 4 osds: 4 up, 4 in
pgmap v4135542: 1152 pgs, 3 pools, 699 GB data, 182 kobjects
1358 GB used, 98819 GB / 100178 GB avail
1152 active+clean
client io 525 kB/s wr, 132 op/s
[hangs until ctrl-c]
---
I can confirm this problem on SID as well.
Since a bunch of python packages were in that update I suspect it is an
incompatibility between those and ceph.
I will open a debian bug report, but hopefull somebody in the know here
will see this message and can act on it.
If nothing else, maybe I can stop other people from upgrading before they
cripple their cluster.
Christian
--
Christian Balzer Network/Systems Engineer
ch...@gol.com Global OnLine Japan/Fusion Communications
http://www.gol.com/
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
