Looks like it's a doc error (at least on master), but it might have changed over time. If you're running Dumpling we should change the docs. -Greg Software Engineer #42 @ http://inktank.com | http://ceph.com
On Sun, Jun 22, 2014 at 10:18 PM, Christian Balzer <ch...@gol.com> wrote: > > Hello, > > This weekend I noticed that the deep scrubbing took a lot longer than > usual (long periods without a scrub running/finishing), even though the > cluster wasn't all that busy. > It was however busier than in the past and the load average was above 0.5 > frequently. > > Now according to the documentation "osd scrub load threshold" is ignored > when it comes to deep scrubs. > > However after setting it to 1.5 and restarting the OSDs the floodgates > opened and all those deep scrubs are now running at full speed. > > Documentation error or did I "unstuck" something by the OSD restart? > > Regards, > > Christian > -- > Christian Balzer Network/Systems Engineer > ch...@gol.com Global OnLine Japan/Fusion Communications > http://www.gol.com/ > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
