What is your "hostname -s" ? In ~/.ssh/config file, you have to configure the hostname the same as what shows with "hostname -s"
Zhe From: ceph-users [mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of Yuriy Grabar Sent: Monday, June 16, 2014 2:41 AM To: ceph-users@lists.ceph.com Cc: Vladyslav Dehtiar -X (vdehtiar - SOFTSERVE INC at Cisco) (vdeht...@cisco.com); rglo...@cisco.com Subject: [ceph-users] Assistance in deploying Ceph cluster Hello everyone, We are looking for support in installing Ceph cluster (1 admin node + 3 node, based on Centos 6.5 Vsphere Vm's) We observe some errors in executing ceph-deploy commands. (all keys and permissions are configured correctly) There is attached log of execution for "ceph-deploy install node1" command. Seems that curl script tries to connect using ipv6 address. Node1 has only one network interface. Note: We had tried to disable ipv6 protocol on node1 side, anyway we faced error like "host not found" According attached log, We understand that problem is in importing rpm key. If I run 'rmp import' manually, it executes on Node1 successfully. Also we know that instead of using 'ceph-deploy install' command we can manually install Ceph service and related tools on Node1 side, but would we like to follow guidance on official site (http://ceph.com/docs/master/start/quick-ceph-deploy/) as it was developed for that. Please suggest me what could be wrong in configuration from my side. Thanks and Regards, Yuriy Hrabar Quality Control engineer [cid:image001.gif@01CF897E.4D1DB1B0] 52 V.Velykoho, Lviv 79053, Ukraine Tel: +380-32-240-9090 x 3290 Cell: +380-50-430-3066 Fax: +380-32-240-9080
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
