Hi, I have faced a similar issue. This happens if the ceph disks aren't purged/cleaned completely. Clear of the contents in the /dev/sdb1 device. There is a file named ceph_fsid in the disk which would have the old cluster's fsid. This needs to be deleted for it to work.
Hope it helps. Sharmila On Mon, May 26, 2014 at 2:52 PM, JinHwan Hwang <calanc...@gmail.com> wrote: > I'm trying to install ceph 0.80.1 on ubuntu 14.04. All other things goes > well except 'activate osd' phase. It tells me they can't find proper fsid > when i do 'activate osd'. This is not my first time of installing ceph, and > all the process i did was ok when i did on other(though they were ubuntu > 12.04 , virtual machines, ceph-emperor) > > ceph@ceph-mon:~$ ceph-deploy osd activate ceph-osd0:/dev/sdb1 > ceph-osd0:/dev/sdc1 ceph-osd1:/dev/sdb1 ceph-osd1:/dev/sdc1 > ... > [ceph-osd0][WARNIN] ceph-disk: Error: No cluster conf found in /etc/ceph > with fsid 05b994a0-20f9-48d7-8d34-107ffcb39e5b > .. > > One weird thing is that, every time while i install and uninstall ceph, > fsid value of /etc/ceph/ceph.conf changes, but those > '05b994a0-20f9-48d7-8d34-107ffcb39e5b' doesn't change. It looks like that > some values retains even though i uninstall ceph. I did purge,purgedata, > forget key, zap and deleting partition with fdisk every time i uninstall > ceph. > > I had changed those fsid value in ceph.conf and distributed it. But that > attempt also reads me to a dead end. After the second attempt, they are > complaining about ondisk 'ondisk fsid 00000000-0000-0000-0000-000000000000 > doesn't match expected cc04e573-7a4d-42e7-9268-3a93f1052aee, invalid > (someone else's?) journal'. So I looked into the disks with fdisk, And i > found some weird message was printed on top of table. > > WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk > doesn't support GPT. Use GNU Parted. > > Those are what i haven't seen before when i was on ceph-emperor. > > Current ceph version(firefly) doesn't support ubuntu 14.04? or Am i > missing some setup? > Thanks in advance for any helps. > > > > > First attempt. > > ceph@ceph-mon:~$ ceph-deploy osd activate ceph-osd0:/dev/sdb1 > ceph-osd0:/dev/sdc1 ceph-osd1:/dev/sdb1 ceph-osd1:/dev/sdc1 > [ceph_deploy.cli][INFO ] Invoked (1.4.0): /usr/bin/ceph-deploy osd > activate ceph-osd0:/dev/sdb1 ceph-osd0:/dev/sdc1 ceph-osd1:/dev/sdb1 > ceph-osd1:/dev/sdc1 > [ceph_deploy.osd][DEBUG ] Activating cluster ceph disks > ceph-osd0:/dev/sdb1: ceph-osd0:/dev/sdc1: ceph-osd1:/dev/sdb1: > ceph-osd1:/dev/sdc1: > [ceph-osd0][DEBUG ] connected to host: ceph-osd0 > [ceph-osd0][DEBUG ] detect platform information from remote host > [ceph-osd0][DEBUG ] detect machine type > [ceph_deploy.osd][INFO ] Distro info: Ubuntu 14.04 trusty > [ceph_deploy.osd][DEBUG ] activating host ceph-osd0 disk /dev/sdb1 > [ceph_deploy.osd][DEBUG ] will use init type: upstart > [ceph-osd0][INFO ] Running command: sudo ceph-disk-activate --mark-init > upstart --mount /dev/sdb1 > [ceph-osd0][WARNIN] ceph-disk: Error: No cluster conf found in /etc/ceph > with fsid 05b994a0-20f9-48d7-8d34-107ffcb39e5b > [ceph-osd0][ERROR ] RuntimeError: command returned non-zero exit status: 1 > [ceph_deploy][ERROR ] RuntimeError: Failed to execute command: > ceph-disk-activate --mark-init upstart --mount /dev/sdb1 > > Second attempt > > ceph@ceph-mon:~$ ceph-deploy osd activate ceph-osd0:/dev/sdb1 > ceph-osd0:/dev/sdc1 ceph-osd1:/dev/sdb1 ceph-osd1:/dev/sdc1 > [ceph_deploy.cli][INFO ] Invoked (1.4.0): /usr/bin/ceph-deploy osd > activate ceph-osd0:/dev/sdb1 ceph-osd0:/dev/sdc1 ceph-osd1:/dev/sdb1 > ceph-osd1:/dev/sdc1 > [ceph_deploy.osd][DEBUG ] Activating cluster ceph disks > ceph-osd0:/dev/sdb1: ceph-osd0:/dev/sdc1: ceph-osd1:/dev/sdb1: > ceph-osd1:/dev/sdc1: > [ceph-osd0][DEBUG ] connected to host: ceph-osd0 > [ceph-osd0][DEBUG ] detect platform information from remote host > [ceph-osd0][DEBUG ] detect machine type > [ceph_deploy.osd][INFO ] Distro info: Ubuntu 14.04 trusty > [ceph_deploy.osd][DEBUG ] activating host ceph-osd0 disk /dev/sdb1 > [ceph_deploy.osd][DEBUG ] will use init type: upstart > [ceph-osd0][INFO ] Running command: sudo ceph-disk-activate --mark-init > upstart --mount /dev/sdb1 > [ceph-osd0][WARNIN] got monmap epoch 1 > [ceph-osd0][WARNIN] 2014-05-26 17:55:06.550365 7fd5ec9c8800 -1 journal > FileJournal::_open: disabling aio for non-block journal. Use > journal_force_aio to force use of aio anyway > [ceph-osd0][WARNIN] 2014-05-26 17:55:06.550400 7fd5ec9c8800 -1 journal > check: ondisk fsid 00000000-0000-0000-0000-000000000000 doesn't match > expected cc04e573-7a4d-42e7-9268-3a93f1052aee, invalid (someone else's?) > journal > [ceph-osd0][WARNIN] 2014-05-26 17:55:06.550422 7fd5ec9c8800 -1 > filestore(/dev/sdb1) mkjournal error creating journal on /dev/sdb1/journal: > (22) Invalid argument > [ceph-osd0][WARNIN] 2014-05-26 17:55:06.550438 7fd5ec9c8800 -1 OSD::mkfs: > ObjectStore::mkfs failed with error -22 > [ceph-osd0][WARNIN] 2014-05-26 17:55:06.550466 7fd5ec9c8800 -1 ** ERROR: > error creating empty object store in /dev/sdb1: (22) Invalid argument > [ceph-osd0][WARNIN] Traceback (most recent call last): > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 2579, in <module> > [ceph-osd0][WARNIN] main() > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 2557, in main > [ceph-osd0][WARNIN] args.func(args) > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 1917, in > main_activate > [ceph-osd0][WARNIN] init=args.mark_init, > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 1749, in > activate_dir > [ceph-osd0][WARNIN] (osd_id, cluster) = activate(path, > activate_key_template, init) > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 1849, in activate > [ceph-osd0][WARNIN] keyring=keyring, > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 1484, in mkfs > [ceph-osd0][WARNIN] '--keyring', os.path.join(path, 'keyring'), > [ceph-osd0][WARNIN] File "/usr/sbin/ceph-disk", line 303, in > command_check_call > [ceph-osd0][WARNIN] return subprocess.check_call(arguments) > [ceph-osd0][WARNIN] File "/usr/lib/python2.7/subprocess.py", line 540, > in check_call > [ceph-osd0][WARNIN] raise CalledProcessError(retcode, cmd) > [ceph-osd0][WARNIN] subprocess.CalledProcessError: Command > '['/usr/bin/ceph-osd', '--cluster', 'ceph', '--mkfs', '--mkkey', '-i', '0', > '--monmap', '/dev/sdb1/activate.monmap', '--osd-data', '/dev/sdb1', > '--osd-journal', '/dev/sdb1/journal', '--osd-uuid', > 'cc04e573-7a4d-42e7-9268-3a93f1052aee', '--keyring', '/dev/sdb1/keyring']' > returned non-zero exit status 1 > [ceph-osd0][ERROR ] RuntimeError: command returned non-zero exit status: 1 > [ceph_deploy][ERROR ] RuntimeError: Failed to execute command: > ceph-disk-activate --mark-init upstart --mount /dev/sdb1 > > > > > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
