> You have file config sync?
>
ceph.conf are same on all servers, keys also not differs.
I have checked the problem now and see ceph -w working fine on all hosts.
Mysterious :-/
Pavel.
> 22 марта 2014 г. 16:11 пользователь "Pavel V. Kaygorodov" <pa...@inasan.ru>
> написал:
> Hi!
>
> I have two nodes with 8 OSDs on each. First node running 2 monitors on
> different virtual machines (mon.1 and mon.2), second node runing mon.3
> After several reboots (I have tested power failure scenarios) "ceph -w" on
> node 2 always fails with message:
>
> root@bes-mon3:~# ceph --verbose -w
> Error initializing cluster client: Error
>
> Logs files are not show any error:
>
> 2014-03-22 16:05:51.288526 osd.3 10.92.8.103:6800/7492 3510 : [INF] 0.262
> deep-scrub ok
> 2014-03-22 16:05:54.997444 osd.1 10.92.8.101:6800/7688 3288 : [INF] 1.22b
> deep-scrub ok
> 2014-03-22 16:06:09.350377 mon.0 10.92.8.80:6789/0 11104 : [INF] pgmap
> v28682: 12288 pgs: 12288 active+clean; 246 MB data, 18131 MB used, 12928 GB /
> 12945 GB avail
>
> 2014-03-22 16:07:24.795144 7f7bf42b4700 1 mon.3@2(peon).paxos(paxos active c
> 67771..68517) is_readable now=2014-03-22 16:07:24.795145
> lease_expire=2014-03-22 16:07:29.791889 has v0 lc 68517
> 2014-03-22 16:07:27.795042 7f7bf42b4700 1 mon.3@2(peon).paxos(paxos active c
> 67771..68517) is_readable now=2014-03-22 16:07:27.795044
> lease_expire=2014-03-22 16:07:32.792003 has v0 lc 68517
>
> On the node 1 I have got the same error just after reboots, but now
> everything seems to be ok:
>
> root@bastet-mon2:/# ceph -w
> cluster fffeafa2-a664-48a7-979a-517e3ffa0da1
> health HEALTH_OK
> monmap e3: 3 mons at
> {1=10.92.8.80:6789/0,2=10.92.8.81:6789/0,3=10.92.8.82:6789/0}, election epoch
> 62, quorum 0,1,2 1,2,3
> osdmap e680: 16 osds: 16 up, 16 in
> pgmap v28692: 12288 pgs, 6 pools, 246 MB data, 36 objects
> 18131 MB used, 12928 GB / 12945 GB avail
> 12288 active+clean
>
>
> 2014-03-22 16:08:10.611578 mon.0 [INF] pgmap v28692: 12288 pgs: 12288
> active+clean; 246 MB data, 18131 MB used, 12928 GB / 12945 GB avail
>
> ////////////////////////////////
>
> How to debug and fix "Error initializing cluster client: Error" problem ?
>
> With best regards,
> Pavel.
>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@lists.ceph.com
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
