Your OSDs aren't supposed to be listed in the config file, but they should show up under /var/lib/ceph. Probably your OSD disks aren't being mounted for some reason (that would be the bug). Try mounting them and seeing what blocked the mount. -Greg Software Engineer #42 @ http://inktank.com | http://ceph.com
On Wed, Feb 26, 2014 at 4:05 AM, Diedrich Ehlerding <diedrich.ehlerd...@ts.fujitsu.com> wrote: > My configuration is: two osd servers, one admin node, three monitors; > all running 072.2 > > I had to switch of one of the OSD servers. The ngood news is: As > expected, all clients survived and continued to work with the > cluster, and the cluster entered a "health warn" state (one monitor > down, 5 of 10 osds down). > > The bad news is: I cannot resume this server's operation. When I > booted the server, the monitor was started automatically - but it did > not join the cluster. "/etc/init.d/ceph start mon" says "already > running", but ceph -s still says that one monitor (this one) is > missing. > > And the OSDs do not come back; nor can I restart them; error message > is: > > # /etc/init.d/ceph start osd.0 > /etc/init.d/ceph: osd.0 not found (/etc/ceph/ceph.conf defines > mon.hvrrzrx301 , /var/lib/ceph defines mon.hvrrzrx301) > > As expected, ceph osd tree display the osd as down: > > -1 2.7 root default > -2 1.35 host hvrrzrx301 > 0 0.27 osd.0 down 0 > 2 0.27 osd.2 down 0 > 4 0.27 osd.4 down 0 > 6 0.27 osd.6 down 0 > 8 0.27 osd.8 down 0 > -3 1.35 host hvrrzrx303 > 1 0.27 osd.1 up 1 > 3 0.27 osd.3 up 1 > 5 0.27 osd.5 up 1 > 7 0.27 osd.7 up 1 > 9 0.27 osd.9 up 1 > > > my ceph.conf only contains those settings which "ceph-deploy new " > installed there; i.e. the osds are not mentioned in ceph.conf. I > assume that this is the problem with my osds? Apparently the cluster > (the surviving monitors) still know that osd.0, osd.2 etc. should > appear in the failed node. > > Alas, I couldnt find any descritpion how to configure osds within > ceph.conf ... I tried to define > [osd.0] > host = my_server > devs = /dev/sdb2 > data = /var/lib/ceph/osd/ceph-0 > > but now it complains now that no filesystem type is defined ... > > To summarize: where can I find rules and procedures how to set up a > ceph.conf not only by ceph-deploy; what must I do in addition to > ceph-deploy in order that I can survive a node outage and can > reattach the node to the cluster, with respect to the monitor on that > node as well as to the osds? > > > best regards > -- > Diedrich Ehlerding, Fujitsu Technology Solutions GmbH, > FTS CE SC PS&IS W, Hildesheimer Str 25, D-30880 Laatzen > Fon +49 511 8489-1806, Fax -251806, Mobil +49 173 2464758 > Firmenangaben: http://de.ts.fujitsu.com/imprint.html > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
