John,

Good catch. I did run it, but missed it when reviewing my actions for this
post.

Matthew
On 9 Dec 2013 18:24, "John Wilkins" <john.wilk...@inktank.com> wrote:

> Matthew,
>
> I'll flag this for future doc changes. I noticed that you didn't run
> ceph-deploy gatherkeys after creating your monitor(s). Any reason for that
> omission?
>
>
> On Mon, Dec 9, 2013 at 3:49 AM, Matthew Walster <matt...@walster.org>wrote:
>
>> I'm having a play with ceph-deploy after some time away from it (mainly
>> relying on the puppet modules).
>>
>> With a test setup of only two debian testing servers, I do the following:
>>
>> ceph-deploy new host1 host2
>> ceph-deploy install host1 host2 (installs emperor)
>> ceph-deploy mon create host1 host2
>> ceph-deploy osd prepare host1:/dev/sda4 host2:/dev/sda4
>> ceph-deploy osd activate host1:/dev/sda4 host2:/dev/sda4
>> ceph-deploy mds create host1 host2
>>
>> Everything is running fine -- copy some files into CephFS, everything it
>> looking great.
>>
>> host1: /etc/init.d/ceph stop osd
>>
>> Still fine.
>>
>> host1: /etc/init.d/ceph stop mds
>>
>> Fails over to the standby mds after a few seconds. Little outage, but to
>> be expected. Everything fine.
>>
>> host1: /etc/init.d/ceph start osd
>> host1: /etc/init.d/ceph start mds
>>
>> Everything recovers, everything is fine.
>>
>> Now, let's do something drastic:
>>
>> host1: reboot
>> host2: reboot
>>
>> Both hosts come back up, but the mds never recovers -- it always says it
>> is replaying.
>>
>> On closer inspection, host2's osd never came back into action. Doing:
>>
>> ceph-deploy osd activate host2:/dev/sda4 fixed the issue, and the mds
>> recovered, as well as the osd now reporting both "up" and "in".
>>
>> Is there something obvious I'm missing? The ceph.conf seemed remarkably
>> empty, do I have to re-deploy the configuration file to the monitors or
>> similar? I've never noticed a problem with puppet deployed hosts, but that
>> manually writes out the ceph.conf as part of the puppet run.
>>
>> Many thanks in advance,
>>
>> Matthew Walster
>>
>>
>>
>> _______________________________________________
>> ceph-users mailing list
>> ceph-users@lists.ceph.com
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>
>>
>
>
> --
> John Wilkins
> Senior Technical Writer
> Intank
> john.wilk...@inktank.com
> (415) 425-9599
> http://inktank.com
>
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to