My OSD servers have 4 network ports currently, configured as: eth0 - lan/osd public eth1 - unused eth2 - osd cluster network #1 eth3 - osd cluster network #2
each server has two OSD's, one is configured on osd cluster network #1, the other on osd cluster network #2. This avoids any messing around with bonding etc. Is having two cluster networks like this a supported configuration? Every osd and mon can reach every other so I think it should be. This setup is somewhat of a hangover from a previous configuration and I'm planning on reconfiguring it. Obviously combining lan and osd traffic isn't ideal. My ideas for possible changes are: 1. move osd traffic to eth1. This obviously limits maximum throughput to ~100Mbytes/second, but I'm getting nowhere near that right now anyway. 2. bond eth[1-3] and have no separate cluster network 3. bond eth[0-3] and run separate networks over vlan's. Any suggestions? Thanks James _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
