Hi, I'm trying to setup my first cluster, (have never manually bootstrapped a cluster)
Is ceph-deploy odd activate/prepare supposed to write to the master ceph.conf file, specific entries for each OSD along the lines of http://ceph.com/docs/master/rados/configuration/osd-config-ref/ ? I appear to have the OSDs prepared without error, but then.. no OSD entries in master cepf.conf nor node /etc/cepf.conf Am I missing something? Thanks in advance, Piers Dawson-Damer Tasmania 2013-09-28 06:47:00,471 [ceph_deploy.sudo_pushy][DEBUG ] will use a remote connection with sudo 2013-09-28 06:47:01,205 [ceph_deploy.osd][INFO ] Distro info: Ubuntu 12.04 precise 2013-09-28 06:47:01,205 [ceph_deploy.osd][DEBUG ] Preparing host storage03-vs-e2 disk /dev/sdm journal /dev/mapper/ceph_journal-osd_12 activate True 2013-09-28 06:47:01,206 [storage03-vs-e2][INFO ] Running command: ceph-disk-prepare --cluster ceph -- /dev/sdm /dev/mapper/ceph_journal-osd_12 2013-09-28 06:47:20,247 [storage03-vs-e2][INFO ] Information: Moved requested sector from 4194338 to 4196352 in 2013-09-28 06:47:20,248 [storage03-vs-e2][INFO ] order to align on 2048-sector boundaries. 2013-09-28 06:47:20,248 [storage03-vs-e2][INFO ] Warning: The kernel is still using the old partition table. 2013-09-28 06:47:20,248 [storage03-vs-e2][INFO ] The new table will be used at the next reboot. 2013-09-28 06:47:20,248 [storage03-vs-e2][INFO ] The operation has completed successfully. 2013-09-28 06:47:20,248 [storage03-vs-e2][INFO ] Information: Moved requested sector from 34 to 2048 in 2013-09-28 06:47:20,249 [storage03-vs-e2][INFO ] order to align on 2048-sector boundaries. 2013-09-28 06:47:20,249 [storage03-vs-e2][INFO ] The operation has completed successfully. 2013-09-28 06:47:20,249 [storage03-vs-e2][INFO ] meta-data=/dev/sdm1 isize=2048 agcount=4, agsize=183105343 blks 2013-09-28 06:47:20,250 [storage03-vs-e2][INFO ] = sectsz=512 attr=2, projid32bit=0 2013-09-28 06:47:20,250 [storage03-vs-e2][INFO ] data = bsize=4096 blocks=732421371, imaxpct=5 2013-09-28 06:47:20,250 [storage03-vs-e2][INFO ] = sunit=0 swidth=0 blks 2013-09-28 06:47:20,250 [storage03-vs-e2][INFO ] naming =version 2 bsize=4096 ascii-ci=0 2013-09-28 06:47:20,251 [storage03-vs-e2][INFO ] log =internal log bsize=4096 blocks=357627, version=2 2013-09-28 06:47:20,251 [storage03-vs-e2][INFO ] = sectsz=512 sunit=0 blks, lazy-count=1 2013-09-28 06:47:20,251 [storage03-vs-e2][INFO ] realtime =none extsz=4096 blocks=0, rtextents=0 2013-09-28 06:47:20,251 [storage03-vs-e2][INFO ] The operation has completed successfully. 2013-09-28 06:47:20,252 [storage03-vs-e2][ERROR ] WARNING:ceph-disk:OSD will not be hot-swappable if journal is not the same device as the osd data 2013-09-28 06:47:20,266 [storage03-vs-e2][INFO ] Running command: udevadm trigger --subsystem-match=block --action=add 2013-09-28 06:47:20,413 [ceph_deploy.osd][DEBUG ] Host storage03-vs-e2 is now ready for osd use. 2013-09-27 10:13:25,349 [storage03-vs-e2][DEBUG ] status for monitor: mon.storage03-vs-e2 2013-09-27 10:13:25,349 [storage03-vs-e2][DEBUG ] { "name": "storage03-vs-e2", 2013-09-27 10:13:25,350 [storage03-vs-e2][DEBUG ] "rank": 2, 2013-09-27 10:13:25,350 [storage03-vs-e2][DEBUG ] "state": "electing", 2013-09-27 10:13:25,350 [storage03-vs-e2][DEBUG ] "election_epoch": 1, 2013-09-27 10:13:25,351 [storage03-vs-e2][DEBUG ] "quorum": [], 2013-09-27 10:13:25,351 [storage03-vs-e2][DEBUG ] "outside_quorum": [], 2013-09-27 10:13:25,351 [storage03-vs-e2][DEBUG ] "extra_probe_peers": [ 2013-09-27 10:13:25,351 [storage03-vs-e2][DEBUG ] "172.17.181.47:6789\/0", 2013-09-27 10:13:25,352 [storage03-vs-e2][DEBUG ] "172.17.181.48:6789\/0"], 2013-09-27 10:13:25,352 [storage03-vs-e2][DEBUG ] "sync_provider": [], 2013-09-27 10:13:25,352 [storage03-vs-e2][DEBUG ] "monmap": { "epoch": 0, 2013-09-27 10:13:25,352 [storage03-vs-e2][DEBUG ] "fsid": "28626c0a-0266-4b80-8c06-0562bf48b793", 2013-09-27 10:13:25,353 [storage03-vs-e2][DEBUG ] "modified": "0.000000", 2013-09-27 10:13:25,353 [storage03-vs-e2][DEBUG ] "created": "0.000000", 2013-09-27 10:13:25,353 [storage03-vs-e2][DEBUG ] "mons": [ 2013-09-27 10:13:25,353 [storage03-vs-e2][DEBUG ] { "rank": 0, 2013-09-27 10:13:25,354 [storage03-vs-e2][DEBUG ] "name": "storage01-vs-e2", 2013-09-27 10:13:25,354 [storage03-vs-e2][DEBUG ] "addr": "172.17.181.47:6789\/0"}, 2013-09-27 10:13:25,354 [storage03-vs-e2][DEBUG ] { "rank": 1, 2013-09-27 10:13:25,354 [storage03-vs-e2][DEBUG ] "name": "storage02-vs-e2", 2013-09-27 10:13:25,355 [storage03-vs-e2][DEBUG ] "addr": "172.17.181.48:6789\/0"}, 2013-09-27 10:13:25,355 [storage03-vs-e2][DEBUG ] { "rank": 2, 2013-09-27 10:13:25,355 [storage03-vs-e2][DEBUG ] "name": "storage03-vs-e2", 2013-09-27 10:13:25,355 [storage03-vs-e2][DEBUG ] "addr": "172.17.181.49:6789\/0"}]}} 2013-09-27 10:13:25,356 [storage03-vs-e2][DEBUG ] 2013-09-27 10:13:25,356 [storage03-vs-e2][DEBUG ] ******************************************************************************** 2013-09-27 10:13:25,356 [storage03-vs-e2][INFO ] monitor: mon.storage03-vs-e2 is running 2013-09-27 10:12:17,384 [storage03-vs-e2.groupthink.cc][INFO ] ceph-all start/running 2013-09-27 10:12:17,384 [storage03-vs-e2.groupthink.cc][INFO ] Setting up ceph-fs-common (0.67.3-1precise) ... 2013-09-27 10:12:17,384 [storage03-vs-e2.groupthink.cc][INFO ] Setting up ceph-mds (0.67.3-1precise) ... 2013-09-27 10:12:17,384 [storage03-vs-e2.groupthink.cc][INFO ] ceph-mds-all start/running 2013-09-27 10:12:17,395 [storage03-vs-e2.groupthink.cc][INFO ] Running command: ceph --version 2013-09-27 10:12:17,547 [storage03-vs-e2.groupthink.cc][INFO ] ceph version 0.67.3 (408cd61584c72c0d97b774b3d8f95c6b1b06341a)
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
