I will update the Cephx docs. The usage in those docs for restarting is for Debian/Ubuntu deployed with mkcephfs. If you are using Dumpling and deployed with ceph-deploy, you will need to use Upstart. See http://ceph.com/docs/master/rados/operations/operating/#running-ceph-with-upstart for details. If you are using Ceph on RHEL, CentOS, etc., use sysvinit.
On Mon, Sep 23, 2013 at 3:21 PM, Gary Mazzaferro <ga...@oedata.com> wrote: > Tim > > Did it work with authentication enabled ? > > -gary > > > On Mon, Sep 23, 2013 at 2:10 PM, Snider, Tim <tim.sni...@netapp.com> wrote: >> >> I modified /etc/ceph.conf for no authentication and to specify both >> private and public networks. /etc/ceph/ceph.conf was distributed to all >> nodes in the cluster >> >> ceph was restarted on all nodes using "service ceph -a restart". >> >> After that authentication is still required and no ports are open on the >> cluster facing (192.168.10.0) network. >> >> Details in http://pastie.org/8349534. >> >> What am I missing something? >> >> >> >> Thanks, >> >> Tim >> >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@lists.ceph.com >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > -- John Wilkins Senior Technical Writer Intank john.wilk...@inktank.com (415) 425-9599 http://inktank.com _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
