Adding to the previous issue. I dont see any files specified in 1,2 and 3
below. I dont have fastcgi.conf, ceph.conf or s3gw.fcgi. I have followed
everything up till that point in the wiki. Is there anything missing in the
wiki or should I create them?



   1.

   Turn off fastcgiwrapper in /etc/httpd/conf.d/fastcgi.conf by commenting
   out the following line:

   #FastCgiWrapper On

   2.

   Add a fastcgi script.

   #!/bin/sh
   exec /usr/bin/radosgw -c /etc/ceph/ceph.conf -n client.radosgw.gateway

   3.

   Make s3gw.fcgi executable:

   chmod +x /var/www/rgw/s3gw.fcgi




On Thu, Sep 12, 2013 at 1:26 PM, sriram <sriram....@gmail.com> wrote:

> That worked. Thank you. I have followed the steps on this wiki (which
> needs update. I will summarize the changes at the end) -
> http://ceph.com/docs/master/install/rpm/
>
> I do not find any file call fastcgi.conf which is specified as shown below
> in the link. Any ideas?
>
>    1.
>
>    Turn off fastcgiwrapper in /etc/httpd/conf.d/fastcgi.conf by
>    commenting out the following line:
>
>    #FastCgiWrapper On
>
>
>
>
> On Wed, Sep 11, 2013 at 4:28 PM, Gagandeep Arora 
> <aroragaga...@gmail.com>wrote:
>
>> Hello,
>>
>>
>> Setup EPEL repo by installing the following package:
>>
>> http://fedora.mirror.serversaustralia.com.au/epel/6/i386/epel-release-6-8.noarch.rpm
>>
>> do
>> # yum install mod_fcgid.x86_64 fcgi.x86_64
>>
>> or download the packages from the following links in case you don't t
>> want to setup EPEL repo:
>> http://dl.fedoraproject.org/pub/epel/6/x86_64/fcgi-2.4.0-10.el6.x86_64.rpm
>>
>> http://dl.fedoraproject.org/pub/epel/6/x86_64/mod_fcgid-2.3.7-1.el6.x86_64.rpm
>>
>>
>> Regards,
>> Gagan
>>
>>
>> On Thu, Sep 12, 2013 at 6:05 AM, sriram <sriram....@gmail.com> wrote:
>>
>>> Thank you. That worked.
>>>
>>> I am trying to install the object storage based on the steps here -
>>>
>>> http://ceph.com/docs/master/install/rpm/#installing-ceph-packages
>>>
>>> Where can I get these RPMs?
>>>
>>> rpm -ivh fcgi-2.4.0-10.el6.x86_64.rpm
>>> rpm -ivh mod_fastcgi-2.4.6-2.el6.rf.x86_64.rpm
>>>
>>>
>>>
>>> On Tue, Sep 10, 2013 at 5:05 PM, Gagandeep Arora <aroragaga...@gmail.com
>>> > wrote:
>>>
>>>> Hello,
>>>>
>>>> I think you downloaded source rpm. Download this package from the
>>>> following link
>>>>
>>>>
>>>> http://mirror.centos.org/centos/6/updates/x86_64/Packages/xfsprogs-3.1.1-10.el6_4.1.x86_64.rpm
>>>>
>>>>
>>>> Regards,
>>>> Gagan
>>>>
>>>>
>>>>
>>>> On Wed, Sep 11, 2013 at 8:54 AM, sriram <sriram....@gmail.com> wrote:
>>>>
>>>>> I installed xfsprogs from
>>>>> http://rpm.pbone.net/index.php3/stat/26/dist/74/size/1400502/name/xfsprogs-3.1.1-4.el6.src.rpm
>>>>> .
>>>>> I then ran "sudo yum install ceph" and I still get the same error. Any
>>>>> ideas?
>>>>>
>>>>>
>>>>> On Wed, Aug 28, 2013 at 3:47 PM, sriram <sriram....@gmail.com> wrote:
>>>>>
>>>>>> Can anyone point me to which xfsprogs RPM to use for RHEL 6
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 28, 2013 at 5:46 AM, Sriram <sriram....@gmail.com> wrote:
>>>>>>
>>>>>>> Yes I read that but I was not sure if installing from Centos 6
>>>>>>> repository can cause issues.
>>>>>>>
>>>>>>> On Aug 27, 2013, at 11:46 PM, "Stroppa Daniele (strp)" <s...@zhaw.ch>
>>>>>>> wrote:
>>>>>>>
>>>>>>>  Check this issue: http://tracker.ceph.com/issues/5193
>>>>>>>
>>>>>>>  You might need the RHEL Scalable File System add-on.
>>>>>>>
>>>>>>>  Cheers,
>>>>>>>   --
>>>>>>> Daniele Stroppa
>>>>>>> Researcher
>>>>>>> Institute of Information Technology
>>>>>>> Zürich University of Applied Sciences
>>>>>>> http://www.cloudcomp.ch
>>>>>>>
>>>>>>>
>>>>>>>   From: sriram <sriram....@gmail.com>
>>>>>>> Date: Tue, 27 Aug 2013 22:50:41 -0700
>>>>>>> To: Lincoln Bryant <linco...@uchicago.edu>
>>>>>>> Cc: <ceph-users@lists.ceph.com>
>>>>>>> Subject: Re: [ceph-users] xfsprogs not found in RHEL
>>>>>>>
>>>>>>>  Tried
>>>>>>>
>>>>>>>  "yum clean all" followed by
>>>>>>> "yum install ceph"
>>>>>>>
>>>>>>>  and the same result.
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Aug 27, 2013 at 7:44 PM, Lincoln Bryant <
>>>>>>> linco...@uchicago.edu> wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>>  xfsprogs should be included in the EL6 base.
>>>>>>>>
>>>>>>>>  Perhaps run "yum clean all" and try again?
>>>>>>>>
>>>>>>>>  Cheers,
>>>>>>>> Lincoln
>>>>>>>>
>>>>>>>>    On Aug 27, 2013, at 9:16 PM, sriram wrote:
>>>>>>>>
>>>>>>>>    I am trying to install CEPH and I get the following error -
>>>>>>>>
>>>>>>>>  ---> Package ceph.x86_64 0:0.67.2-0.el6 will be installed
>>>>>>>> --> Processing Dependency: xfsprogs for package:
>>>>>>>> ceph-0.67.2-0.el6.x86_64
>>>>>>>> ---> Package python-babel.noarch 0:0.9.4-5.1.el6 will be installed
>>>>>>>> ---> Package python-backports-ssl_match_hostname.noarch
>>>>>>>> 0:3.2-0.3.a3.el6 will be installed
>>>>>>>> ---> Package python-docutils.noarch 0:0.6-1.el6 will be installed
>>>>>>>> --> Processing Dependency: python-imaging for package:
>>>>>>>> python-docutils-0.6-1.el6.noarch
>>>>>>>> ---> Package python-jinja2.x86_64 0:2.2.1-1.el6 will be installed
>>>>>>>> ---> Package python-pygments.noarch 0:1.1.1-1.el6 will be installed
>>>>>>>> ---> Package python-six.noarch 0:1.1.0-2.el6 will be installed
>>>>>>>> --> Running transaction check
>>>>>>>> ---> Package ceph.x86_64 0:0.67.2-0.el6 will be installed
>>>>>>>> --> Processing Dependency: xfsprogs for package:
>>>>>>>> ceph-0.67.2-0.el6.x86_64
>>>>>>>> ---> Package python-imaging.x86_64 0:1.1.6-19.el6 will be installed
>>>>>>>> --> Finished Dependency Resolution
>>>>>>>> Error: Package: ceph-0.67.2-0.el6.x86_64 (ceph)
>>>>>>>>            Requires: xfsprogs
>>>>>>>>
>>>>>>>>
>>>>>>>>  Machine Info -
>>>>>>>>
>>>>>>>>  Linux version 2.6.32-131.4.1.el6.x86_64 (
>>>>>>>> mockbu...@x86-003.build.bos.redhat.com) (gcc version 4.4.5
>>>>>>>> 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Fri Jun 10 10:54:26 EDT 2011
>>>>>>>>   _______________________________________________
>>>>>>>> ceph-users mailing list
>>>>>>>> ceph-users@lists.ceph.com
>>>>>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>  _______________________________________________ ceph-users mailing
>>>>>>> list ceph-users@lists.ceph.com
>>>>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> ceph-users mailing list
>>>>> ceph-users@lists.ceph.com
>>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>>>
>>>>>
>>>>
>>>
>>
>
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to