Hi, I am having a bit of problem with mon after the node was rebooted. I found the following error messages repeating and wonder if someone have seen similar issue and what may be the solution to solve it:
2013-07-02 09:55:06.455179 7f866f60a700 0 -- 10.4.132.18:0/0 >> 10.4.132.18:6800/0 pipe(0x2187280 sd=29 :49663 s=1 pgs=0 cs=0 l=0).connect claims to be 10.4.132.18:6800/918 not 10.4.132.18:6800/0 - wrong node! Thanks in advance. Regards, Luke ------------------------------------------------------------------ - - DISCLAIMER: This e-mail (including any attachments) is for the addressee(s) only and may contain confidential information. If you are not the intended recipient, please note that any dealing, review, distribution, printing, copying or use of this e-mail is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original message. MIMOS Berhad is a research and development institution under the purview of the Malaysian Ministry of Science, Technology and Innovation. Opinions, conclusions and other information in this e- mail that do not relate to the official business of MIMOS Berhad and/or its subsidiaries shall be understood as neither given nor endorsed by MIMOS Berhad and/or its subsidiaries and neither MIMOS Berhad nor its subsidiaries accepts responsibility for the same. All liability arising from or in connection with computer viruses and/or corrupted e-mails is excluded to the fullest extent permitted by law.
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
