On Fri, Jun 21, 2013 at 12:11:23PM +0800, Da Chun wrote: > Hi List, > The default journal size is 1G, which I think is too small for my Gb network. > I want to extend all the journal partitions to 2 or 4G. How can I do that? > The osds were all created by commands like "ceph-deploy osd create > ceph-node0:/dev/sdb". The journal partition is on the same disk together with > the corresponding data partition. > I notice there is an attribute "osd journal size" which value is 1024. I > guess this is why the command "ceph-deploy osd create" set the journal > partition size as 1G. > > > I want to do this job using steps as below: > 1. Change the "osd journal size" in the ceph.conf to 4G > 2. Remove the osd > 3. Readd the osd > 4. Repeat 2 and 3 steps for all the osds. > > > This needs lots of manual work and is time consuming. Are there better ways > to do that? Thanks!
Have a look at these commands: http://ceph.com/docs/master/man/8/ceph-osd/#cmdoption-ceph-osd--flush-journal http://ceph.com/docs/master/man/8/ceph-osd/#cmdoption-ceph-osd--mkjournal And this setting: http://ceph.com/docs/master/rados/configuration/osd-config-ref/#index-2 If I'm not mistaken that is a per-machine global or per-osd setting in /etc/ceph/ceph.conf > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
