Here is my ceph.conf. I just figured out that the second host = isn't
necessary, though it is like that on the 5-minute quick start guide...
(Perhaps I'll submit my couple of fixes that I've had to implement so far).
That fixes the "redefined host" issue, but none of the others.
[global]
# For version 0.55 and beyond, you must explicitly enable or
# disable authentication with "auth" entries in [global].
auth cluster required = cephx
auth service required = cephx
auth client required = cephx [osd]
osd journal size = 1000
#The following assumes ext4 filesystem.
filestore xattr use omap = true
# For Bobtail (v 0.56) and subsequent versions, you may add
#settings for mkcephfs so that it will create and mount the file
#system on a particular OSD for you. Remove the comment `#`
#character for the following settings and replace the values in
#braces with appropriate values, or leave the following settings
#commented out to accept the default values. You must specify
#the --mkfs option with mkcephfs in order for the deployment
#script to utilize the following settings, and you must define
#the 'devs' option for each osd instance; see below. osd mkfs
#type = {fs-type} osd mkfs options {fs-type} = {mkfs options} #
#default for xfs is "-f" osd mount options {fs-type} = {mount
#options} # default mount option is "rw,noatime"
# For example, for ext4, the mount option might look like this:
#osd mkfs options ext4 = user_xattr,rw,noatime
# Execute $ hostname to retrieve the name of your host, and
# replace {hostname} with the name of your host. For the
# monitor, replace {ip-address} with the IP address of your
# host.
[mon.a]
host = ceph
mon addr = 10.81.2.100:6789 [osd.0]
host = ceph
# For Bobtail (v 0.56) and subsequent versions, you may add
# settings for mkcephfs so that it will create and mount the
# file system on a particular OSD for you. Remove the comment
# `#` character for the following setting for each OSD and
# specify a path to the device if you use mkcephfs with the
# --mkfs option.
#devs = {path-to-device}
[osd.1]
host = ceph
#devs = {path-to-device}
[mds.a]
host = ceph
On Wed, May 1, 2013 at 12:14 PM, Mike Dawson
<mike.daw...@scholarstack.com>wrote:
> Wyatt,
>
> Please post your ceph.conf.
>
> - mike
>
>
> On 5/1/2013 12:06 PM, Wyatt Gorman wrote:
>
>> Hi everyone,
>>
>> I'm setting up a test ceph cluster and am having trouble getting it
>> running (great for testing, huh?). I went through the installation on
>> Debian squeeze, had to modify the mkcephfs script a bit because it calls
>> monmaptool with too many paramaters in the $args variable (mine had
>> "--add a [ip address]:[port] [osd1]" and I had to get rid of the [osd1]
>> part for the monmaptool command to take it). Anyway, so I got it
>> installed, started the service, waiting a little while for it to build
>> the fs, and ran "ceph health" and got (and am still getting after a day
>> and a reboot) the following error: (note: I have also been getting the
>> first line in various calls, unsure why it is complaining, I followed
>> the instructions...)
>>
>> warning: line 34: 'host' in section 'mon.a' redefined
>> 2013-05-01 12:04:39.801102 b733b710 -1 WARNING: unknown auth protocol
>> defined: [osd]
>> HEALTH_WARN 384 pgs degraded; 384 pgs stuck unclean; recovery 21/42
>> degraded (50.000%)
>>
>> Can anybody tell me the root of this issue, and how I can fix it? Thank
>> you!
>>
>> - Wyatt Gorman
>>
>>
>> ______________________________**_________________
>> ceph-users mailing list
>> ceph-users@lists.ceph.com
>> http://lists.ceph.com/**listinfo.cgi/ceph-users-ceph.**com<http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com>
>>
>>
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
