I am going to attempt to get the kernel output by running my tests in a
vm (so I can get a dump of the console) and seeing if I get the same
results.
-Trevor
On 2013-03-06 00:43, tra26 wrote:
All systems are running: 3.2.0-38-generic.
-Trevor
On 2013-03-06 00:40, Dino Yancey wrote:
What kernel version are you using on your client?
On Tue, Mar 5, 2013 at 4:48 PM, tra26 <tr...@cs.drexel.edu> wrote:
Hello,
I've been working to deploy ceph recently and have been conducting
some
performance tests and have ran into some problems. I've created an
rbd
image, mapped it on a client and put a file system on it. I've
tried with
both ext4 and xfs to which the same results occur. After a while
the system
running bonnie will lock up leaving some kernel messages on the
console and
requires a hard reset. This has occurred on two different machines,
one was
a monitor and the other was a plain client.
My setup: 5 osds and 3 monitors (2 monitors are on osd machines).
Replica is
set to 3 on the pool that my image is stored and the cluster was
healthy at
the start. I am using the 0.56 packages for ubuntu.
Any ideas on what is causing the system to lockup/panic?
Thanks,
-Trevor Adams
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
______________________________
Dino Yancey
2GNT.com Admin
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
