> > My mission is to make a ceph cluster production ready. > We already have a mock-up of 6 nodes deployed via cephadm to test ceph's > features > We want to install a ceph cluster to get off our dependencies to SAN and to > store around 400 TB of data. We'll use mostly block storage for VMs/k8 and a > bit of CephFS and Object storage > > Are those specs good for our purpose ? > > - 3 MGR/MON/RGW 128 GB RAM 32 cores (is it recommended to put RGW daemon in > the same node as MGR/MON ?) > - 2 MDS 16 GB RAM 8 cores > - * OSD 8 GB RAM 8 cores (with high IOPS per core)
It is very common to have a single type of node, a converged architecture, especially with smaller deployments. The above three lines RAM/cores for entire nodes? I would suggest Run 5 mons, not 3. That lets you survive a double failure. It happens. Run one RGW / ingress on every cluster node. RGW scales better horizontally than vertically. 18x nodes: - 10x 7.6 TB SSD - NVMe-only chassis, no SAS/SATA, no RAID HBA - M.2 boot - bonded 25GE - 128GB RAM - at least 32 physical cores / 64 hyperthreads per node. If using AMD processors, disable IOMMU and consider a 1S chassis and an XXXX-P SKU or 9x nodes like the above but with 15 TB SSDs Enterprise SSDs, not client-class. > > We are pretty new to ceph so any advice would be appreciate ! > > Thanks ! > Vivien > > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
