Hi Igor, Ah OK; So in the failure mode of, for instance, 1 failed dedicated SSD/NVMe based dedicated DB devices serving 1 OSD, is there going to be no real way to replace that failed DB device alone without also replacing/wiping the OSD and then having the OSD back-fill objects again from cluster replicas?
I had been looking into e.g. ceph-bluestore-tool<https://docs.ceph.com/en/latest/man/8/ceph-bluestore-tool/> bluefs-bdev-new-db <https://docs.ceph.com/en/latest/man/8/ceph-bluestore-tool/> , which seemed to offer some way forward around this. But it may be the case that this only offers a way forward to replace an older/smaller/slower but still working DB device to a replacement/larger/faster one. And if the old DB device is actually failed and un-usable, then the whole DB+OSD needs replacing? Here we've lost too many DB devices and by extension too many blocked OSDs to ever recover this Ceph cluster, I fear... Thanks, Paul ******************* Paul Browne Research Computing Platforms University Information Services Roger Needham Building JJ Thompson Avenue University of Cambridge Cambridge United Kingdom E-Mail: pf...@cam.ac.uk<mailto:pf...@cam.ac.uk> Tel: 0044-1223-746548 ******************* ________________________________ From: Igor Fedotov <igor.fedo...@croit.io> Sent: 23 April 2025 09:35 To: Paul Browne <pf...@cam.ac.uk>; ceph-users@ceph.io <ceph-users@ceph.io> Subject: Re: [ceph-users] Cluster recovery: DC power failure killed OSD node BlueStore block.DB devices Hi Paul, have I got your idea correct - you're trying to attach new empty DB volumes to existing OSDs in an attempt to recover these OSDs, right? And original SSD drives which kept DB volumes are physically dead? If so than IMO it's a way to nowhere, "recovered" OSDs wouldn't run without original metadata. This is rather a waste of time.. Thanks, Igor On 23.04.2025 0:11, Paul Browne wrote: > Hi ceph-users, > > We recently suffered a total power failure at our main DC; fortunately, our > production Ceph cluster emerged unscathed but a smaller Ceph cluster came > back with the majority of its dedicated SSD BlueStore block.DB devices dead > (but its HDD OSD devices unharmed). This cluster underpinned a small > OpenStack cloud, so it would be preferable to recover it rather than writing > it off. > > In terms of deployment tooling, this ailing Ceph cluster is a fairly standard > Red Hat Ceph Storage 7 (so Quincy) cephadm deployed cluster, with the main > wrinkle about it being that both the DB and HDD OSD devices make use of the > cephadm supported LVM->LUKS layering above the BlueStore devices. > > The dead BlueStore block.DB devices are of course blocking the surviving HDD > OSD daemons (in cephadm deployed containers) from coming up cleanly and so > the Ceph cluster status is currently very degraded (attached status for the > ugly picture) > > I've kicked around some ideas of recovering the dead DB devices and > restarting down+out OSDs by; > > * Manually partitioning replacement SSDs into new DB device partitions+LVs > * Installing the same LUKS keys on them retrieved from the Ceph config DB, > matching up against which OSD is on which OSD host. > > * > Manually changing over device links for OSDs to their DB device with > "ceph-bluestore-tool bluefs-bdev-new-db" or similar > * > Try restarting OSDs with updated links to new LVM->LUKS->block.DB devices > > This approach seems highly messy and subject to needing to extract a lot of > information error-free from dumps of ceph volume lvm, list in order to > exactly match extant OSD UUIDs to newly created DB devicemapper devices. > > Is there going to be some smarter/better/faster way to non-destructively > recover these intact HDD OSDs which have links to dead block.DB devices, > using native cephadm tooling rather than getting so low-level as all the > above? > > Many thanks for any advice, > > ******************* > Paul Browne > Research Computing Platforms > University Information Services > Roger Needham Building > JJ Thompson Avenue > University of Cambridge > Cambridge > United Kingdom > E-Mail: pf...@cam.ac.uk<mailto:pf...@cam.ac.uk> > Tel: 0044-1223-746548 > ******************* > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
