I have it working on my machines- the global configuration for me looks like
[global]
fsid = fe3a7cb0-69ca-11eb-8d45-c86000d08867
mon_host = [v2:192.168.2.142:3300/0,v1:192.168.2.142:6789/0]
[v2:192.168.2.141:3300/0,v1:192.168.2.141:6789/0]
[v2:192.168.2.199:3300/0,v1:192.168.2.199:6789/0]
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
The important thing for me was to add the FSID, and the auth sections
Also note the port is the 6789 not 3300.
-----Original Message-----
From: duluxoz <dulu...@gmail.com>
Sent: Wednesday, February 28, 2024 4:05 AM
To: ceph-users@ceph.io
Subject: [ceph-users] CephFS On Windows 10
Hi All,
I'm looking for some pointers/help as to why I can't get my Win10 PC to
connect to our Ceph Cluster's CephFS Service. Details are as follows:
Ceph Cluster:
- IP Addresses: 192.168.1.10, 192.168.1.11, 192.168.1.12
- Each node above is a monitor & an MDS
- Firewall Ports: open (ie 3300, etc)
- CephFS System Name: my_cephfs
- Log files: nothing jumps out at me
Windows PC:
- Keyring file created and findable: ceph.client.me.keyring
- dokany installed
- ceph-for-windows installed
- Can ping all three ceph nodes
- Connection command: ceph-dokan -l v -o -id me --debug --client_fs my_cephfs
-c C:\ProgramData\Ceph\ceph.conf
Ceph.conf contents:
~~~
[global]
mon_host = 192.168.1.10, 192.168.1.11, 192.168.1.12
log to stderr = true
log to syslog = true
run dir = C:/ProgramData/ceph
crash dir = C:/logs/ceph
debug client = 2
[client]
keyring = C:/ProgramData/ceph/ceph.client.me.keyring
log file = C:/logs/ceph/$name.$pid.log
admin socket = C:/ProgramData/ceph/$name.$pid.asok
~~~
Windows Logfile contents (ieC:/logs/ceph/client.me.NNNN.log):
~~~
2024-02-28T18:26:45.201+1100 1 0 monclient(hunting): authenticate timed out
after 300
2024-02-28T18:31:45.203+1100 1 0 monclient(hunting): authenticate timed out
after 300
2024-02-28T18:36:45.205+1100 1 0 monclient(hunting): authenticate timed out
after 300
~~~
Additional info from Windows CLI:
~~~
failed to fetch mon config (--no-mon-config to skip)
~~~
So I've gone through the doco and done some Google-foo and I can't work out
*why* I'm getting a failure; why I'm getting the authentication failure. I know
it'll be something simple, something staring me in the face, but I'm at the
point where I can't see the forest for the trees - please help.
Any help greatly appreciated
Thanks in advance
Cheers
Dulux-Oz
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to
ceph-users-le...@ceph.io
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
