Hi Stefan, bare metal. I just need to know what kernel version and how to configure the new queue parameters (I guess its kernel boot parameters). I will do a fio test to the raw block device first, I think this is what you posted? I can probably try these settings on our test cluster, which is entirely SAS HDD based.
If there is anything I need to do when deploying an OSD, the bare metal instructions are good. I actually start all daemons myself, its containerized, but with custom startup scripts. Thanks and best regards, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14 ________________________________________ From: Stefan Kooman <ste...@bit.nl> Sent: Wednesday, June 7, 2023 8:01 AM To: Frank Schilder; Anthony D'Atri; ceph-users@ceph.io Subject: Re: [ceph-users] Re: Encryption per user Howto On 6/6/23 15:33, Frank Schilder wrote: > Yes, would be interesting. I understood that it mainly helps with buffered > writes, but ceph is using direct IO for writes and that's where bypassing the > queues helps. Yeah, that makes sense. > Are there detailed instructions somewhere how to set up a host to disable the > queues? I don't have time to figure this out myself. It should be detailed > enough so that I just need to edit some configs, reboot et voila. Do you want instructions for package based Ceph install, or container based? I tested it with both deployment types. Container based (Cephadm)) is a little bit more involved, but certainly doable. > > I have a number of new hosts to deploy and I could use one of these to run a > test. They have a mix of NVMe, SSD and HDD and I can run fio benchmarks > before deploying OSDs in the way you did That would be great, Gr. Stefan . _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
