Yes, just expose each disk as an individual OSD and you'll already be better off. Depending what type of SSD they are - if they can sustain high random write IOPS you may even want to consider partitioning each disk and create 2 OSDs per SSD to make better use of the available IO capacity. For all-flash storage CPU utilization is also a factor - generally fewer cores with a higher clock speed would be preferred over a cpu with more cores but lower clock speeds in such a setup.
On Thu, 28 Oct 2021 at 21:25, Lokendra Rathour <lokendrarath...@gmail.com> wrote: > > Hey Janne, > Thanks for the feedback, we only wanted to have huge space to test more with > more data. do you advise some other way to plan this out? > So I have 15 disks with 1 TB each. Creating multiple OSD would help or > please advise. > > thanks, > Lokendra > > > On Thu, Oct 28, 2021 at 1:52 PM Janne Johansson <icepic...@gmail.com> wrote: >> >> Den tors 28 okt. 2021 kl 10:18 skrev Lokendra Rathour >> <lokendrarath...@gmail.com>: >> > >> > Hi Christian, >> > Thanks for the update. >> > I have 5 SSD on each node i.e. a total of 15 SSD using which I have >> > created this RAID 0 Disk, which in Ceph becomes three OSD. Each OSD with >> > around 4.4 TB of disk. and in total it is coming around 13.3 TB. >> > Do you feel local RAID is an issue here? Keeping independent disks can >> > help recovery fast or increase the performance? please advice. >> >> >> That is a very poor way to set up ceph storage. >> >> >> -- >> May the most significant bit of your life be positive. > > > > -- > ~ Lokendra > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
