Hello,Wondering if anyone had any feedback on some commands I could try to manually update the current OSD that is down to 16.2.1 so I can at least get around this upgrade bug and back to 100%?If there is any log's or if it seems a new bug and I should create a bugzilla report do let me know.Thanks > On Fri Apr 30 2021 21:54:30 GMT+0800 (Singapore Standard Time), Ashley > Merrick <ash...@amerrick.co.uk> wrote: > Hello All,I was running 15.2.8 via cephadm on docker Ubuntu 20.04I just > attempted to upgrade to 16.2.1 via the automated method, it successfully > upgraded the mon/mgr/mds and some OSD's, however it then failed on an OSD and > hasn't been able to pass even after stopping and restarting the upgrade.It > reported the following ""message": "Error: UPGRADEREDEPLOYDAEMON: Upgrading > daemon osd.35 on host sn-s01 failed.""If I run 'ceph health detail' I get > lot's of the following error : "ValueError: not enough values to unpack > (expected 2, got 1)" throughout the detail reportUpon googling, it looks like > I am hitting something along the lines of https://158.69.68.89/issues/48924 & > https://tracker.ceph.com/issues/49522What do I need to do to either get > around this bug, or a way I can manually upgrade the remaining ceph OSD's to > 16.2.1, currently my cluster is working but the last OSD it failed to upgrade > is currently offline (I guess as no image attached to it now as it failed to > pull it), and I have a cluster with OSD's from not 15.2.8 and 16.2.1Thanks > > Sent via MXlogin
Sent via MXlogin _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
