This is what I have when I query prometheus, most hdd's are still sata 5400rpm,
there are also some ssd's. I also did not optimize cpu frequency settings.
(forget about the instance=c03, that is just because the data comes from mgr
c03, these drives are on different hosts)
ceph_osd_apply_latency_ms
ceph_osd_apply_latency_ms{ceph_daemon="osd.0", instance="c03", job="ceph"}
11
ceph_osd_apply_latency_ms{ceph_daemon="osd.1", instance="c03", job="ceph"}
5
ceph_osd_apply_latency_ms{ceph_daemon="osd.10", instance="c03", job="ceph"}
8
ceph_osd_apply_latency_ms{ceph_daemon="osd.11", instance="c03", job="ceph"}
33
ceph_osd_apply_latency_ms{ceph_daemon="osd.12", instance="c03", job="ceph"}
42
ceph_osd_apply_latency_ms{ceph_daemon="osd.13", instance="c03", job="ceph"}
17
ceph_osd_apply_latency_ms{ceph_daemon="osd.14", instance="c03", job="ceph"}
27
ceph_osd_apply_latency_ms{ceph_daemon="osd.15", instance="c03", job="ceph"}
15
ceph_osd_apply_latency_ms{ceph_daemon="osd.16", instance="c03", job="ceph"}
14
ceph_osd_apply_latency_ms{ceph_daemon="osd.17", instance="c03", job="ceph"}
4
ceph_osd_apply_latency_ms{ceph_daemon="osd.18", instance="c03", job="ceph"}
18
ceph_osd_apply_latency_ms{ceph_daemon="osd.19", instance="c03", job="ceph"}
1
ceph_osd_apply_latency_ms{ceph_daemon="osd.2", instance="c03", job="ceph"}
14
ceph_osd_apply_latency_ms{ceph_daemon="osd.20", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.21", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.22", instance="c03", job="ceph"}
9
ceph_osd_apply_latency_ms{ceph_daemon="osd.23", instance="c03", job="ceph"}
2
ceph_osd_apply_latency_ms{ceph_daemon="osd.24", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.25", instance="c03", job="ceph"}
15
ceph_osd_apply_latency_ms{ceph_daemon="osd.26", instance="c03", job="ceph"}
18
ceph_osd_apply_latency_ms{ceph_daemon="osd.27", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.28", instance="c03", job="ceph"}
4
ceph_osd_apply_latency_ms{ceph_daemon="osd.29", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.3", instance="c03", job="ceph"}
10
ceph_osd_apply_latency_ms{ceph_daemon="osd.30", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.31", instance="c03", job="ceph"}
2
ceph_osd_apply_latency_ms{ceph_daemon="osd.32", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.33", instance="c03", job="ceph"}
1
ceph_osd_apply_latency_ms{ceph_daemon="osd.34", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.35", instance="c03", job="ceph"}
2
ceph_osd_apply_latency_ms{ceph_daemon="osd.36", instance="c03", job="ceph"}
2
ceph_osd_apply_latency_ms{ceph_daemon="osd.37", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.38", instance="c03", job="ceph"} 0
ceph_osd_apply_latency_ms{ceph_daemon="osd.39", instance="c03", job="ceph"}
1
ceph_osd_apply_latency_ms{ceph_daemon="osd.4", instance="c03", job="ceph"}
11
ceph_osd_apply_latency_ms{ceph_daemon="osd.40", instance="c03", job="ceph"}
8
ceph_osd_apply_latency_ms{ceph_daemon="osd.41", instance="c03", job="ceph"}
5
ceph_osd_apply_latency_ms{ceph_daemon="osd.5", instance="c03", job="ceph"}
12
ceph_osd_apply_latency_ms{ceph_daemon="osd.6", instance="c03", job="ceph"}
18
ceph_osd_apply_latency_ms{ceph_daemon="osd.7", instance="c03", job="ceph"}
8
ceph_osd_apply_latency_ms{ceph_daemon="osd.8", instance="c03", job="ceph"}
33
ceph_osd_apply_latency_ms{ceph_daemon="osd.9", instance="c03", job="ceph"}
22
avg (ceph_osd_apply_latency_ms)
9.333333333333336
So I guess it is possible for you to get lower values on the lsi hba
Maybe you can tune read a head on the lsi with something like this.
echo 8192 > /sys/block/$line/queue/read_ahead_kb
echo 1024 > /sys/block/$line/queue/nr_requests
Also check for pci-e 3 those have higher bus speeds.
> -----Original Message-----
> Sent: 19 April 2021 20:57
> Subject: Re: [ceph-users] HBA vs caching Raid controller
>
>
>
> >> For the background: we have many Perc H800+MD1200 [1] systems running
> >> with
> >> 10TB HDDs (raid0, read ahead, writeback cache).
> >> One server has LSI SAS3008 [0] instead of the Perc H800,
> >> which comes with 512MB RAM + BBU. On most servers latencies are
> around
> >> 4-12ms (average 6ms), on the system with the LSI controller we see
> >> 20-60ms (average 30ms) latency.
> >
> > How did you get these latencies? Then I can show you maybe what I have
> with the SAS2308.
>
> Via grafana->prometheus->ceph-mgr:
>
> ------------------------------------------------------------------------
> --------
> avg by (hostname) (ceph_osd_apply_latency_ms{dc="$place"} * on
> (ceph_daemon) group_left(hostname) ceph_osd_metadata{dc="$place"})
> ------------------------------------------------------------------------
> --------
>
> where $place = the data center name. I cross checked the numbers with
> the OSDs using
>
> ------------------------------------------------------------------------
> --------
> ceph_osd_apply_latency_ms{dc="$place"}
> ------------------------------------------------------------------------
> --------
>
> which showed that all OSDs attached to that controller are in a similar
> range, so the average above is not hiding "one bad osd".
>
> Does that help?
>
>
> --
> Sustainable and modern Infrastructures by ungleich.ch
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
