Hi, Probably a basic/stupid question but I'm asking anyway. Through lack of knowledge and experience at the time, when we set up our pools, our pool that holds the majority of our data was created with a PG/PGP num of 64. As the amount of data has grown, this has started causing issues with balance of data across OSDs. I want to increase the PG count to at least 512, or maybe 1024 - obviously, I want to do this incrementally. However, rather than going from 64 to 128, then 256 etc, I'm considering doing this in much smaller increments over a longer period of time so that it will hopefully be doing the majority of moving around of data during the quieter time of day. So, may start by going in increments of 4 until I get up to 128 and then go in jumps of 8 and so on.
My question is, will I still end up with the same net result going in increments of 4 until I hit 128 as I would if I were to go straight to 128 in one hit. What I mean by that is that once I reach 128, would I have the exact same level of data balance across PGs as I would if I went straight to 128? Are there any drawbacks in going up in small increments over a long period of time? I know that I'll have uneven PG sizes until I get to that exponent of 2 but that should be OK as long as the end result is the desired result. I suspect I may have a greater amount of data moving around overall doing it this way but given my goal is to reduce the amount of intensive data moves during higher traffic times, that's not a huge concern in the grand scheme of things. Thanks in advance, Mark _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
