Hi, Thanks for the email, But we are not using RAID at all, we are using HBAs LSI HBA 9400-8e. Eash HDD is configured as an OSD.
On Thu, Nov 12, 2020 at 12:19 PM Edward kalk <ek...@socket.net> wrote: > for certain CPU architecture, disable spectre and meltdown mitigations. > (be certain network to physical nodes is secure from internet access) (use > apt proxy, http(s), curl proxy servers) > Try to toggle on or off the physical on disk cache. (raid controller > command) > ^I had same issue, doing both of these fixed it. In my case the disks I > had needed on disk cache hard set to ‘on’. raid card default was not good. > (be sure to have diverse power and UPS protection if needed to run on disk > cache on) (good RAID. battery if using raid cache improves perf.) > > to see the perf impact of spec. and melt. mitigation vs. off, run: dd > if=/dev/zero of=/dev/null > ^i run for 5 seconds and then ctl+c > will show a max north bridge ops. > > to see the difference in await and IOPs when toggle RAID card features and > on disk cache I run: iostat -xtc 2 > and use fio to generate disk load for testing IOPs. (google fio example > commands) > ^south bridge +raid controller to disks ops and latency. > > -Edward Kalk > Datacenter Virtualization > Performance Engineering > Socket Telecom > Columbia, MO, USA > ek...@socket.net > > > On Nov 12, 2020, at 4:45 AM, athreyavc <athrey...@gmail.com> wrote: > > > > Jumbo frames enabled and MTU is 9000 > > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
