On 25/06/2020 5:10 pm, Frank Schilder wrote:
I was pondering with that. The problem is, that on Centos systems it seems to
be ignored, in general it does not apply to SAS drives, for example, and that
it has no working way of configuring which drives to exclude.
For example, while for data disks for ceph we have certain minimum
requirements, like functioning power loss protection, for an OS boot drive I
really don't care. Power outages on cheap drives that loose writes has not been
a problem since ext4. A few log entries or contents of swap - who cares. Here,
performance is more important than data security on power loss.
I would require a configurable option that works in the same way for all types
of protocols, SATA, SAS, NVMe disks, you name it. At time of writing, I don't
know of any.
Yes, I can see that would be an issue for more upmarket systems to mine
:) Fortunately my cluster is small potatoes compared to most here, just
34TB across 23 OSD's, all SATA. Given that, its easy enough to turn
write caching of by default for my nodes and enable the OS drive via a
startup script - I presume there are no cache flush issues when turning
it on.
I did set this for the whole cluster, can't say I noticed any particular
improvement in performance when testing from my VM's, but it certainly
didn't degrade it either. And I felt it safe given the OSD safety issues
mentioned earlier.
Everything is on a UPS, but nevertheless, stuff happens - turns out in
our new office we share the switchboard with the office next door and
the new load of our servers popped the circuit breakers overnight. So
the neighbour took it upon himself to let himself in and turn our UPS
off, taking our nodes down hard. No damage done fortunately, but words
were spoken later.
--
Lindsay
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
