Is there a possibility to specify partitions? I only see whole discs/devices chosen by vendor or model name.
Regards, Lars Am Thu, 18 Jun 2020 09:52:36 +0000 schrieb Eugen Block <ebl...@nde.ag>: > You'll need to specify drive_groups in a yaml file if you don't deploy > standalone OSDs: > > https://docs.ceph.com/docs/master/cephadm/drivegroups/ > > > > > Zitat von kle...@psi-net.si: > > > I'm trying to deploy a ceph cluster with a cephadm tool. I've > > already successfully done all steps except adding OSDs. My testing > > equipment consists of three hosts. Each host has SSD storage, where > > OS is installed into. On that storage I created partition, which can > > be used as a ceph block.db. Hosts have also 2 additional HDs > > (spinning drives) for OSD data. On docs I couldn't find how to > > deploy such configuration. Do you have any hints, how to do that? > > Thanks for help! > > _______________________________________________ > > ceph-users mailing list -- ceph-users@ceph.io > > To unsubscribe send an email to ceph-users-le...@ceph.io > > > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io -- Informationstechnologie Berlin-Brandenburgische Akademie der Wissenschaften Jägerstraße 22-23 10117 Berlin Tel.: +49 30 20370-352 http://www.bbaw.de _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
