that part of erasure profiles are only used when a crush rule is created when creating a pool without explicitly specifying a crush rule
Paul -- Paul Emmerich Looking for help with your Ceph cluster? Contact us at https://croit.io croit GmbH Freseniusstr. 31h 81247 München www.croit.io Tel: +49 89 1896585 90 On Mon, May 18, 2020 at 9:09 PM Dan <d...@void.at> wrote: > I think I did a bad job explaining my issue: > > I have a fairly old cluster which had a crush map with two trees, one for > hdds and one for ssd, like root hdd {..} and root ssd {...} now with the > newer class based rules I used crushtool —reclassify to merge those two > trees into root default {...} So I already downloaded, edited and > Reuploaded the crush map, which resulted in a very minor data movement, > which crushtool —compare predicted. One of my pools is an ec pool with an > ec profile with crush-root=hdd. I can not, I think, change the ec-profile > of an existing pool. But since the pool runs on that profile, with the now > non existing crush-root=hdd, I am wondering if I can expect to run into > trouble down the line or does the cluster use some internal id, and the > string displayed only matters on creation. Basically am I safe or am I > hosed? > > > On Mon 18. May 2020 at 19:05, Eric Smith <eric.sm...@vecima.com> wrote: > > > You'll probably have to decompile, hand edit, recompile, and reset the > > crush map pointing at the expected root. The EC profile is only used > during > > pool creation and will not change the crush map if you change the EC > > profile. I think you can expect some data movement if you change the root > > but either way I would test it in a lab if you have one available. > > > > -----Original Message----- > > From: Dan <dan34...@gmail.com> On Behalf Of Dan > > Sent: Monday, May 18, 2020 9:14 AM > > To: ceph-users@ceph.io > > Subject: [ceph-users] Dealing with non existing crush-root= after > > reclassify on ec pools > > > > I have reclassified a CRUSH map, using the crushtool to a class based > > ruleset. > > I still have an ec pool with an older ec profile with a new non existing > > crush-root=hdd > > > > I already switched the pool’s ruleset over to a newer rule with a newer > > ec-profile with a correct crush-root But pool ls detail still shows: > > > > > > pool 9 'data' erasure profile jerasure-3-1 size 4 min_size 3 ….. > > > > Jerasure-3-1 being the old profile with non existing crush-root > > > > So what do I do now? Switching over the pool ruleset does not change the > > ec-profile, can I switch the ec-profile over? > > What can I expect having a pool with a ec-profile with a non existing > > crush-root key? > > > > Please advise. > > _______________________________________________ > > ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an > > email to ceph-users-le...@ceph.io > > > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
