We did that too, using ceph-volume lvm batch --dmcrypt --osds-per-device 2 /dev/nvme0n1
(it was on a mimic cluster) On 10/22/19 8:17 AM, Ingo Schmidt wrote: > Hi Frank > > We use such a setup on our nautilus cluster. I manually partitioned the NVME > drive to 8 equally sized partitions with fdisk (saved the partition layout to > a file for later reference). You can then create OSDs with > >> ceph-volume lvm create --bluestore --data /dev/sd<x> --block.db >> /dev/nvme0n1<partition-nr> > > This will create an OSD on /dev/sdx and put block.db and the WAL to the > partition on the NVME. > > greetings > Ingo > > > Von: "Frank R" <frankaritc...@gmail.com> > An: "ceph-users" <ceph-us...@ceph.com> > Gesendet: Dienstag, 22. Oktober 2019 03:06:55 > Betreff: [ceph-users] multiple nvme per osd > > Hi all, > Has anyone successfully created multiple partitions on an NVME device using > ceph-disk? > > If so, which commands were used? > > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io > > > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
