On Sunday, June 26, 2011 04:00:46 AM Rudi Ahlers wrote: > [root@HP-DL360 ~]# blkid -s TYPE > /dev/mapper/LVM-swap: TYPE="swap" > /dev/mapper/LVM-root: TYPE="ext3" > /dev/cciss/c0d0p1: TYPE="ext3" > /dev/LVM/root: TYPE="ext3" > /dev/LVM/swap: TYPE="swap" > /dev/mapper/LVM-data: TYPE="ext3" > [root@HP-DL360 ~]# fdisk -l /dev/sda > [root@HP-DL360 ~]#
> Which filesystems can this command recognize? I checked the MAN page, but > couldn't find a list of filesystems that it's familiar with Ok, you have an LVM setup, and it appears to be on a hardware RAID. Issue in turn: pvscan vgscan lvscan to see how things are sliced. They're likely all on a /dev/cciss/c0d0pX where X is the partition. That is, you have an array, and that array doesn't expose its disks in the normal /dev/sdX fashion, apparently. I guess that from seeing /dev/cciss/c0d0p1 (controller 0, disk 0, partition 1, perhaps?) which is likely mounted as /boot. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
