Dear All,
Thanks for all the help.
By the way I did install centos 5.5 in text mode and everything went
fine .cthe server to the network and then found that i was not able to ping
the gateway
when i do a network restart i see that eth0 comes up normally
also when i do a modprobe eth0 im returened back to prompt with no errors
the switch port shows the link up
ifconfig shows the interface is up and running
how could I know that the driver is installed correctly .. or any way i
could know that my interface is up and working correctly
thanks and regards
if you need more details i would highly apprecite if you could ask please
regards
simon
On Dec 14, 2010 5:18pm, Ross Walker <rswwal...@gmail.com> wrote:
On Dec 13, 2010, at 11:49 PM, Nico Kadel-Garcia nka...@gmail.com> wrote:
> On Mon, Dec 13, 2010 at 10:01 AM, benedict dcunha
> sylvan.dcu...@gmail.com> wrote:
>> Dear All,
>>
>> We have a new SUN BLADE X6270 SERVER MODULES and i am trying to install
>> centos 5.5 64 bit . the installations starts fine but when it reaches
the
>> point inialthe X server it says initialization done but then gives a
fatal
>> error and stops
>
> Install in text mode: type "linux text" at the installation init
> screen. It's not as flexible, but it avoids this failed detection of
> your graphics chipset or video card.
Or use the 'vnc' option to make it available over vnc instead then
connect from any vnc capable device to do the installation.
-Ross
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
