On 2010/08/03 02:02 AM, Tom H wrote:
On Mon, Aug 2, 2010 at 4:51 PM, Rudi Ahlers<r...@softdux.com> wrote:
I hope someone can help me. I'm trying to setup a D-Link DWA-547 on
CentOS 5.5 x64 in console only mode, i.e. there's no X installed. The
Wiki article suggests using NetWork Manager, but since there's no X
installed on this server, it's not possible.
How do I go about installing this card?
Here's the output of lspci -v:
01:00.0 Network controller: Atheros Communications Inc. AR5008
Wireless Network Adapter (rev 01)
Subsystem: D-Link System Inc Unknown device 3a6b
I can only point you in the right direction (sorry!). This is from
memory and from a setup that I've used on Fedora in the past so CentOS
_should_ be similar...
You have to install wpa_supplicant and the relevant configuration files are:
/etc/wpa_supplicant/wap_supplicant.conf
/etc/sysconfig/wpa_supplicant
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/sysconfig/network-scripts/keys-eth0
__________________
I already have it installed:
[r...@intranet ~]# rpm -qa | grep wpa
wpa_supplicant-0.5.10-9.el5
[r...@intranet ~]# ll /etc/wpa_supplicant/
total 4
-rw------- 1 root root 107 Mar 31 06:58 wpa_supplicant.conf
[r...@intranet ~]# ll /etc/sysconfig/wpa_supplicant
-rw-r--r-- 1 root root 391 Mar 31 06:58 /etc/sysconfig/wpa_supplicant
But, I got no idea how to configure the card in console-only mode, i.e.
without X installed.
[r...@intranet ~]# iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
[r...@intranet ~]# iwconfig wlan0
wlan0 No such device
[r...@intranet ~]# ifconfig wlan0
wlan0: error fetching interface information: Device not found
--
Kind Regards
Rudi Ahlers, SoftDux MD
Website: http://www.SoftDux.com
Blog: http://Blog.SoftDux.com
Support: http://Billing.SoftDux.com
Office: 087 805 9573
Cell: 082 554 7532
Fax: 086 609 6128
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
