Here is my script for post install if you want to try it.
In order for the shuffling to not occur you do need to create the udev
rules file somehow. I am not sure how mangled this will be in email
but it
is worth a try. It should run OK with nothing else. I have a better
version in the works but the enhancements are mainly useful for Fedora
19-21.
I did forget to say I also block NetworkManager from the interfaces.
############################
#!/bin/bash
## BIND MAC address to proper interfaces so they stay persistent
## I want them to stay as they were in kickstart
## This can cause issues with VLAN interfaces for both bond dev's and
base
eth dev's.
## The bond one was solved by adding in the "KERNEL="eth?*" as that
will
only apply to physical
## Devices. Once we have VLAN's on a real device instead of just on
BOND's this then applies
## to the hardware devices as well. The core issue is that the MAC
address is inherited
## by all of the children devices and thus the UDEV rule has to be
crafted to only apply
## to the base physical device.
## This one was solved via adding DRIVERS=="?*" as the VLAN int's
wont
have one
echo "[KICKSTART] Binding eth interfaces to the expected MAC
address
in UDEV"
echo "## Created by Kickstart to keep network interfaces in an
expected order" > \
/etc/udev/rules.d/70-persistent-net.rules
echo "" >> \
/etc/udev/rules.d/70-persistent-net.rules
cd /sys/class/net/
for NETDEV in $(ls | grep eth | sort)
do
## Create a UDEV rule for each eth interface
echo "## ${NETDEV} interface" >> \
/etc/udev/rules.d/70-persistent-net.rules
## We throw this one in here as it can contain some useful
information
echo "## $(dmesg | grep ${NETDEV} | grep -i -v -e "console" -e
"Command line" | head -1)" >> \
/etc/udev/rules.d/70-persistent-net.rules
echo -n "SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\",
"
\
/etc/udev/rules.d/70-persistent-net.rules
echo -n "ATTR{address}==\"$(cat ${NETDEV}/address)\", " >> \
/etc/udev/rules.d/70-persistent-net.rules
echo -n "ATTR{dev_id}==\"0x0\", ATTR{type}==\"1\",
KERNEL==\"eth?*\", " >> \
/etc/udev/rules.d/70-persistent-net.rules
echo -e "NAME=\"${NETDEV}\"\n" >> \
/etc/udev/rules.d/70-persistent-net.rules
## Make a log of the devices present during install
echo -e "${NETDEV} $(cat ${NETDEV}/address)\n" >>
/root/ksnet-devices
## Also remove the HWADDR line from all of the net config files
grep -v -e NAME -e HWADDR -e NM_CONTROLLED \
/etc/sysconfig/network-scripts/ifcfg-${NETDEV} | sed
's/\"//g' \
> /etc/sysconfig/network-scripts/ifcfg-${NETDEV}-tmp
echo "NM_CONTROLLED=no" >> /etc/sysconfig/network-
scripts/ifcfg-${NETDEV}-tmp
/usr/bin/perl -p -i -e 's/dhcp/none/' /etc/sysconfig/network-
scripts/ifcfg-${NETDEV}-tmp
mv -f /etc/sysconfig/network-scripts/ifcfg-${NETDEV}-tmp \
/etc/sysconfig/network-scripts/ifcfg-${NETDEV}
done
###########################
On Wed, 25 Feb 2015 14:53:40 -0600, Ashley M. Kirchner
<ash...@pcraft.com>
wrote:
Thanks for that Jason but it didn't solve the problem. The system is
still
coming up with the interfaces shuffled. It seems to *always* want to
use
the added ethernet card as eth0.
On Wed, Feb 25, 2015 at 1:37 PM, Jason Warr <ja...@warr.net> wrote:
Starting back in RHEL/Cent 5 I found that the only way to make sure
your
interface enumeration was consistent after install with what you had
during
install was to create a udev rules file using the mac addresses as
the
key. It is easy to run a short script in postinstall to create it
based
on
how anaconda has seen them.
In order for this to work on Cent 6 you have to set biosdevname=0
on the
kernel boot for the installed system.
PXE boot options:
label c6inst-sda
kernel /linux-boot/cent6-x64/vmlinuz
append initrd=/linux-boot/cent6-x64/initrd.img ksdevice=bootif
ip=dhcp ks=http://xx.xx.xx.xx/install/linux/ks/basic-cent6-sda.cfg
ipappend 2
In kickstart:
BOOTOPTS="biosdevname=0"
Also in kickstart I do not specify the config for ANY network
interfaces.
I let anaconda pull in only the config for the boot interface from
PXE.
I
manually configure everything else. The only thing I do to non-boot
interfaces is set the DHCP and ONBOOT to no.
On Wed, 25 Feb 2015 14:21:18 -0600, Ashley M. Kirchner <
ash...@pcraft.com>
wrote:
Version 6.6 ...
On Wed, Feb 25, 2015 at 1:17 PM, Jim Perrin <jper...@centos.org>
wrote:
<overly trimmed>
On 02/25/2015 01:56 PM, Ashley M. Kirchner wrote:
Ok, so some of this now works, but I'm still having problems.
With
the
bootif option, the system now correctly configures and uses the
same
interface to get its kickstart file. However, when the system is
done
and
boots up, the interfaces are still messed up. So this is what I
have
in
the
kickstart file:
What version of CentOS 6 is this?
In the PXE config file I have:
IPAPPEND 2
APPEND ks=http://192.168.x.x/ks/portico.ks
initrd=centos/x86_64/initrd.img
ramdisk_size=100000 ksdevice=bootif
As soon as I *remove* the additional ethernet card, the system
will
boot
up
with the ports configured correctly (port 1 = eth0, port 2 =
eth1).
So
why
is it that as soon as there is an additional one, all things go
to
hell?
Why must the boot process shuffle them? More importantly, how do
I
prevent
this so that the system comes up properly after a kickstart
install?
The reason I ask the version, is this is exactly the sort of
thing that
biosdevname is designed to solve. With biosdevname, you get
devices
like
'em1, em2, p6p1', which aren't as friendly as 'eth0' but also keep
names
sane and avoid the hair-tearing issues you're experiencing
currently.
You don't appear to be adding anything via your append line that
would
disable biosdevname, so I must assume you're using a much older 6
base
install.
In my experience biosdevname creates just as many problems as it
solves.
Dell can keep it.
--
Jim Perrin
The CentOS Project | http://www.centos.org
twitter: @BitIntegrity | GPG Key: FA09AD77
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
